FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE

27.07.2014 Views
FI-mai-08 Fondul Naţional de Documente Normative ICS 49.030.50 102 EN 4493:2008 Aerospace series - Inserts, screw thread, helical coil, selflocking, in heat resisting nickel base alloy NI-PH1801 (NIP96HT, Nimonic 90), silver plated ICS 49.030.10 103 EN 4626-002:2008 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 002: Specification of performance and contact arrangements ICS 49.060 104 EN 4626-003:2008 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 003: Adaptor for plug ICS 49.060 105 EN 4626-004:2008 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 004: Adaptor for receptacle ICS 49.060 106 EN 4626-101:2008 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 101: Optical contact (subassembly) for plug - Product standard ICS 49.060 107 EN 4632-001:2008 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials – Part 001: General requirements ICS 49.025.01 108 EN 4632-002:2008 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials – Part 002: Homogeneous assemblies aluminium and aluminium alloys ICS 49.025.01 109 EN 54-24:2008 Fire detection and fire alarm systems - Part 24: Components of voice alarm systems – Loudspeakers ICS 13.310 110 EN 818-1:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance ICS 53.020.30 111 EN 818-2:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 ICS 53.020.30 112 EN 818-3:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 ICS 53.020.30 113 EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 ICS 53.020.30 114 EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 ICS 53.020.30 14

FI-mai-08 Fondul Naţional de Documente Normative 115 EN 818-5:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 ICS 53.020.30 116 EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer ICS 53.020.30 117 EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) ICS 53.020.30 118 EN 9101:2008 Aerospace series - Quality management systems – Assessment (based on EN ISO 9001:2000) ICS 03.120.10; 49.020 119 EN ISO 10270:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995/Cor 1:1997) ICS 77.060; 27.120.10 120 EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008) ICS 59.080.70 121 EN ISO 11303:2008 Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) ICS 77.060 122 EN ISO 11463:2008 Corrosion of metals and alloys - Evaluation of pitting corrosion (ISO 11463:1995) ICS 77.060 123 EN ISO 11782-1:2008 Corrosion of metals and alloys - Corrosion fatigue testing – Part 1: Cycles to failure testing (ISO 11782-1:1998) ICS 77.060 124 EN ISO 11782-2:2008 Corrosion of metals and alloys - Corrosion fatigue testing – Part 2: Crack propagation testing using precracked specimens (ISO 11782-2:1998) ICS 77.060 125 EN ISO 1179-1:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2007) ICS 23.100.40 126 EN ISO 1179-2:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2007) ICS 23.100.40 127 EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007) ICS 23.100.40 128 EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud 15

Page 1 and 2: FI-mai-08 Fondul Naţional de Docum


Page 5 and 6: FI-mai-08 9. ГОСТ Р 52817-2007

Page 7 and 8: FI-mai-08 4. СТБ 948-2007 5. С



Page 13: FI-mai-08 Fondul Naţional de Docum




aerospace

corrosion

alloys

requirements

documente

normative

optical

fondul

aparate

metals

foaie

www.standard.md

FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE

FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE ... View more FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE

Delete template?

Save as template ?

FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE

FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE