FOAIE INFORMATIVÄ REVISTE NOI DOCUMENTE NORMATIVE
FOAIE INFORMATIVÄ REVISTE NOI DOCUMENTE NORMATIVE
FOAIE INFORMATIVÄ REVISTE NOI DOCUMENTE NORMATIVE
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Fondul Naţional de Standarde iunie 2010<br />
STANDARDE INTERNAŢIONALE<br />
1. IEC 60601-1-11:2010 Medical electrical equipment – Part 1-11: General requirements for<br />
basic safety and essential performance – Collateral standard:<br />
Requirements for medical electrical equipment and medical<br />
electrical systems used in the home healthcare environment<br />
2. ISO 10052:2004/<br />
Amd 1:2010<br />
Acoustics – Field measurements of airborne and impact sound<br />
insulation and of service equipment sound -- Survey method --<br />
Amendment 1<br />
3. ISO 10298:2010 Determination of toxicity of a gas or gas mixture<br />
4. ISO 10307-2:2009/<br />
Cor 1:2010<br />
Petroleum products -- Total sediment in residual fuel oils – Part 2:<br />
Determination using standard procedures for ageing – Technical<br />
Corrigendum 1<br />
5. ISO 10342:2010 Ophthalmic instruments – Eye refractometers<br />
6. ISO 10580:2010 Resilient, textile and laminate floor coverings – Test method for<br />
volatile organic compound (VOC) emissions<br />
7. ISO 10679:2010/ Steel -- Cast tool steel – Technical Corrigendum 1<br />
Cor 1:2010<br />
8. ISO 10840:2008 Пластмассы. Руководящие указания по применению типовых<br />
испытаний на огнестойкость<br />
9. ISO 10846-1:2008 Акустика и вибрация. Лабораторные измерения<br />
виброакустических передаточных характеристик упругих<br />
элементов. Часть 1. Принципы и руководящие указания<br />
10. ISO 10846-2:2008 Акустика и вибрация. Лабораторные измерения<br />
виброакустических передаточных характеристик упругих<br />
элементов. Часть 2. Определение динамической жёсткости<br />
упругих опор при поступательном движении. Прямой метод<br />
11. ISO 10846-5:2008 Акустика и вибрация. Лабораторные измерения<br />
виброакустических передаточных характеристик упругих<br />
элементов. Часть 5. Метод измерения входной частотной<br />
характеристики для определения низкочастотной переходной<br />
жесткости упругих опор при поступательном движении<br />
12. ISO 11089:2010 Rubber, raw synthetic -- Determination of antidegradants by<br />
highperformance liquid chromatography<br />
13. ISO 11093-5:2009/ Paper and board -- Testing of cores -- Part 5: Determination of<br />
Cor 1:2010<br />
characteristics of concentric rotation – Technical Corrigendum 1<br />
14. ISO 11201:2010 Acoustics – Noise emitted by machinery and equipment --<br />
Determination of emission sound pressure levels at a work station<br />
and at other specified positions in an essentially free field over a<br />
reflecting plane with negligible environmental corrections<br />
15. ISO 11202:2010 Acoustics -- Noise emitted by machinery and equipment --<br />
Determination of emission sound pressure levels at a work station<br />
and at other specified positions applying approximate environmental<br />
corrections<br />
16. ISO 11204:2010 Acoustics -- Noise emitted by machinery and equipment --<br />
Determination of emission sound pressure levels at a work station<br />
and at other specified positions applying accurate environmental<br />
corrections<br />
17. ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure<br />
drainage and sewerage networks – Part 4: Lining with cured-in-place<br />
pipes<br />
18. ISO 11323:2010 Iron ore and direct reduced iron – Vocabulary<br />
19. ISO 11363-1:2010 Gas cylinders -- 17E and 25E taper threads for connection of valves<br />
to gas cylinders – Part 1: Specifications<br />
13