P-40 Warhawk 300 ARF - Stanbridges Hobby Shop
P-40 Warhawk 300 ARF - Stanbridges Hobby Shop
P-40 Warhawk 300 ARF - Stanbridges Hobby Shop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6. Next, slide the washer back on the motor shaft.<br />
Thread the 5mm locknut back on the shaft.<br />
<br />
8. Apply a small amount of canopy glue to the nut.<br />
Use a small amount so the spinner can be easily<br />
removed if the propeller requires replacement.<br />
Display Stand Assembly<br />
Required Parts<br />
Assembled airframe Display stand base<br />
Display stand strut<br />
<br />
1. Insert the tab from the display stand strut into the<br />
slot in the display stand base. They will fit tight and<br />
not require glue to keep them from coming apart.<br />
<br />
7. Use a 5mm nut driver to tighten the nut holding<br />
the propeller on the motor.<br />
<br />
9. Slide the spinner back on the propeller. Allow<br />
the glue to fully cure before flying your model.<br />
E-flite P-<strong>40</strong> <strong>Warhawk</strong> Assembly Manual<br />
11
Change language