P-40 Warhawk 300 ARF - Stanbridges Hobby Shop
P-40 Warhawk 300 ARF - Stanbridges Hobby Shop
P-40 Warhawk 300 ARF - Stanbridges Hobby Shop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Propeller and Spinner<br />
Removal and Replacement<br />
Required Parts<br />
Fuselage assembly<br />
Spinner<br />
Required Tools<br />
Nut driver: 5mm<br />
Propeller<br />
Canopy glue<br />
<br />
2. Use a 5mm nut driver to remove the nut holding<br />
the propeller on the motor.<br />
<br />
4. Before installing a new propeller, make sure it is<br />
installed in the correct direction. One side will have<br />
a hex that keys to the motor. Make sure it installed<br />
with this hex toward the motor.<br />
<br />
1. Carefully pull the spinner forward to remove it<br />
from the motor. It will take a small amount of force<br />
to remove.<br />
<br />
3. Remove the washer and propeller from the motor.<br />
<br />
5. Slide the propeller on the motor shaft.<br />
If you are checking the rotation of the motor, now is<br />
the time to do so while the propeller is removed.<br />
10 E-flite P-<strong>40</strong> <strong>Warhawk</strong> Assembly Manual
Change language