SERVICE MANUAL - Stag ICP AG

More documents

Recommendations

Info

3. PARTS IDENTIFICATION ACCESSORIES 7
4. INSTALLATION & TEST Before servicing, ask the customer what the trouble is. Check the setup (power supply is 220-240V AC, remove the transit bolts....). Check with the troubleshooting guide. Plan your service method by referring to the disassembly instructions. Service the unit. After servicing, operate the appliance to see whether it functions correctly. STANDARD INSTALLATION The appliance should be installed as follows: REMOVE THE SHIPPING INSTALL THE APPLIANCE ADJUST THE BOLTS ON A FLAT AND FIRM SURFACE LEVELING Remove the 4 shipping bolts with the supplied wrench. Do first lower side to remove easily. Turn the leveling feet to adjust the appliance. Keep the shipping bolts and spanner for future use. Insert the 4 caps (provided) into the hole. Turn clockwise to raise; counterclockwise to lower. 8
Page 1 and 2: Website: http: //www.LGEservice.com
Page 3 and 4: CONTENTS 1. SPECIFICATIONS ........
Page 5 and 6: 2. FEATURES & TECHNICAL EXPLANATION
Page 7: 2-5. THE DOOR CAN NOT BE OPENED Whi
Page 11 and 12: TEST OPERATION Preparation for Pres
Page 13 and 14: 6. OPERATION • Use this button to
Page 15 and 16: 7. TROUBLESHOOTING 7-1. BEFORE PERF
Page 17 and 18: ERROR SYMPTOM CAUSE 8 OVER CURRENT
Page 19 and 20: SYMPTOM GUIDE FOR SERVICE CALL Door
Page 21 and 22: 8-2. FAULT DIAGNOSIS AND TROUBLESHO
Page 23 and 24: If it still has severe vibration an
Page 25 and 26: LIQUID DETERGENT/SOFTENER DOES NOT
Page 27 and 28: WASH HEATER TROUBLE 220-240V AC 220
Page 29 and 30: SPIN TROUBLE Rinse Spin Check durin
Page 31 and 32: Disconnect the POWER connector and
Page 33 and 34: Unscrew the a screw from the Top Br
Page 35 and 36: Open the door. Unscrew the 7 screws
Page 37 and 38: Disassemble the cabinet cover. Sepa
Page 39 and 40: 10. EXPLODED VIEW 10-1. CABINET & C
Page 41: 10-3. DISPENSER ASSEMBLY HOT (RED)

SERVICE MANUAL - Stag ICP AG

Create successful ePaper yourself

Delete template?

Save as template?