SERVICE MANUAL - Stag ICP AG

More documents

Recommendations

Info

Disassemble the back cover. Remove the bolt. Pull out the Rotor. Unscrew the 2 screws from the tub bracket. Remove the 6 bolts on the stator. Unplug the 2 connectors from the stator. Disassemble the damper hinges from the tub and base. Separate the dampers. NOTE • Once removed, replace the damper with new one. 37
10. EXPLODED VIEW 10-1. CABINET & CONTROL PANEL ASSEMBLY A105 A490 A495 A201 A220 A303 38
Page 1 and 2: Website: http: //www.LGEservice.com
Page 3 and 4: CONTENTS 1. SPECIFICATIONS ........
Page 5 and 6: 2. FEATURES & TECHNICAL EXPLANATION
Page 7 and 8: 2-5. THE DOOR CAN NOT BE OPENED Whi
Page 9 and 10: 4. INSTALLATION & TEST Before servi
Page 11 and 12: TEST OPERATION Preparation for Pres
Page 13 and 14: 6. OPERATION • Use this button to
Page 15 and 16: 7. TROUBLESHOOTING 7-1. BEFORE PERF
Page 17 and 18: ERROR SYMPTOM CAUSE 8 OVER CURRENT
Page 19 and 20: SYMPTOM GUIDE FOR SERVICE CALL Door
Page 21 and 22: 8-2. FAULT DIAGNOSIS AND TROUBLESHO
Page 23 and 24: If it still has severe vibration an
Page 25 and 26: LIQUID DETERGENT/SOFTENER DOES NOT
Page 27 and 28: WASH HEATER TROUBLE 220-240V AC 220
Page 29 and 30: SPIN TROUBLE Rinse Spin Check durin
Page 31 and 32: Disconnect the POWER connector and
Page 33 and 34: Unscrew the a screw from the Top Br
Page 35 and 36: Open the door. Unscrew the 7 screws
Page 37: Disassemble the cabinet cover. Sepa
Page 41: 10-3. DISPENSER ASSEMBLY HOT (RED)

SERVICE MANUAL - Stag ICP AG

Create successful ePaper yourself

Delete template?

Save as template?