SERVICE MANUAL - Stag ICP AG

More documents

Recommendations

Info

9. DISASSEMBLY INSTRUCTIONS Be sure to unplug the machine out of the outlet before disassembling and repairing the parts. TOP PLATE ASSEMBLY Unscrew 2 screws on the back of the top plate. Pull the top plate backward and upward as shown. DRAWER Disconnect the Display PWB Assembly connector from Trans cable. Pull out the drawer and unscrew 2 screws. Lift the left side of the Control Panel Assembly and pull it out. CONTROL PANEL ASSEMBLY DISPLAY PWB ASSEMBLY Unscrew the 9 screws from the Control Panel Assembly. Disassemble the Display PWB Assembly. 29
Disconnect the POWER connector and SENSOR SWITCH ASSEMBLY. Remove the Protect Cover. CONNECTOR PROTECT COVER Disconnect the connectors. Unscrew 1 screw on the back. Disassemble the Main PWB. 30
Page 1 and 2: Website: http: //www.LGEservice.com
Page 3 and 4: CONTENTS 1. SPECIFICATIONS ........
Page 5 and 6: 2. FEATURES & TECHNICAL EXPLANATION
Page 7 and 8: 2-5. THE DOOR CAN NOT BE OPENED Whi
Page 9 and 10: 4. INSTALLATION & TEST Before servi
Page 11 and 12: TEST OPERATION Preparation for Pres
Page 13 and 14: 6. OPERATION • Use this button to
Page 15 and 16: 7. TROUBLESHOOTING 7-1. BEFORE PERF
Page 17 and 18: ERROR SYMPTOM CAUSE 8 OVER CURRENT
Page 19 and 20: SYMPTOM GUIDE FOR SERVICE CALL Door
Page 21 and 22: 8-2. FAULT DIAGNOSIS AND TROUBLESHO
Page 23 and 24: If it still has severe vibration an
Page 25 and 26: LIQUID DETERGENT/SOFTENER DOES NOT
Page 27 and 28: WASH HEATER TROUBLE 220-240V AC 220
Page 29: SPIN TROUBLE Rinse Spin Check durin
Page 33 and 34: Unscrew the a screw from the Top Br
Page 35 and 36: Open the door. Unscrew the 7 screws
Page 37 and 38: Disassemble the cabinet cover. Sepa
Page 39 and 40: 10. EXPLODED VIEW 10-1. CABINET & C
Page 41: 10-3. DISPENSER ASSEMBLY HOT (RED)

SERVICE MANUAL - Stag ICP AG

Create successful ePaper yourself

Delete template?

Save as template?