The Design of a Family of Screw Compressors for Oil–Flooded ...

More documents

Recommendations

Info

4 TESTING OF THE COMPRESSOR PROTOTYPES Two test rigs were used for simultaneous testing of the compressor prototypes, one at City University and another at Elgi. Both test rigs meet all Pneurop/Cagi requirements for screw compressor acceptance tests. The compressors were tested according to ISO 1706 and their delivery flow was measured following BS 5600. High accuracy test equipment was used for the measurement of all relevant parameters. Fig. 4 Compressor test layout and the computer screen Fig. 5 Comparison of the estimated and measured flow in function of compressor power, Compressor 4/5-73
Fig. 6 Comparison of the estimated and measured flow in function of compressor power, Compressor 4/5-102 Fig. 5 Comparison of the estimated and measured flow in function of compressor power, Compressor 4/5-159
Page 1 and 2: The Design of a Family of Screw Com
Page 3 and 4: This profile/configuration combinat
Page 5: The key factor for all screw compre

The Design of a Family of Screw Compressors for Oil–Flooded ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?