audio file in the INSERT mode - Fostex

More documents

Recommendations

Info

Slate tone function During playback or while stopped, you can feed the 1-kHz slate tone from all the outputs, as well as record the slate tone for a specified duration at the beginning of an audio file or between songs. • Feeding the slate tone 1. Press and hold down the [SLATE TONE] key during playback or while stopped (the SLATE TONE indicator is lit). While holding down the [SLATE TONE] key, the 1-kHz slate tone is fed from all the (digital and analog) outputs of the unit. 2. To stop feeding the tone, release the [SLATE TONE] key (the SLATE TONE indicator turns off). Tips: During recording, pressing and holding down the [SLATE TONE] key records the slate tone for the duration. • Recording the slate tone at the beginning of an audio file or between songs You can insert the slate tone at the beginning of an audio file or between songs while stopped. This operation is possible only in the INSERT mode. The following assumes that the audio file is stopped at the beginning (ABS 0) or at the end of the last recording. 1. Press the [AUDIO RDY - INSERT] key to turn on the INSERT indicator. 2. Press the [SHIFT] key to turn on the SHIFT indicator. 3. Press the [SLATE TONE] key to turn on the SLATE TONE indicator. The unit performs slate tone recording for a duration set by the "Slate tone time setting" menu in the Setup mode. The Slate tone time is initially set to 10 seconds. After finishing slate tone recording, the unit stops. See "Chapter 11: Setup mode" for details about the "Slate tone time setting" menu. ABS 0 Recording start point Inserting the slate tone at the beginning of an audio file or between songs ABS 0 SLATE TONE Recording end point Time Recording start point Recording the slate tone between songs SLATE TONE Time 4-16
Cueing by the jog function You can cue audio sound using the jog function as if you operate an analog tape recorder. By installing the optional "VGA card", you can cue audio while watching the waveform shown on an external monitor display . 1. While stopped, press the [JOG] key (the JOG indicator lights up). The jog mode is active. The indicator above the jog dial lights up, showing that the recorder stills. 2. Rotate the jog dial to cue audio. You can cue audio as if you are using an analog tape recorder. While cueing, the appropriate < or > indicator above the jog dial is lit according to the rotating direction. 3. To quit the jog mode, press any of the transport keys (the [STOP] key, etc.). Cueing/high speed shuttle by the shuttle function Using the shuttle function, you can perform the shuttle cueing or the high-speed search. • Shuttle cueing 1. Press the [SHUTTLE] key during playback (the SHUTTLE indicator lights up). The shuttle mode is active. The indicator light up, showing that the recorder stills. 2. Rotate the jog dial to start cueing. You can cue forward or backward at a speed between 0 and twice the normal speed as if you are using an analog tape recorder. While cueing, the appropriate < or > indicator above the jog dial is lit according to the rotating direction. 3. To quit the shuttle mode, press any of the transport keys (the [STOP] key, etc.). If the cueing position comes to the ABS 0 or REC END point, the recorder automatically quits the shuttle mode and stops. • High-speed search 1. Press the [SHUTTLE] key while stopped (the SHUTTLE indicator lights up). The shuttle mode is active. The indicator light up and the recorder stills. 2. Rotate the jog dial to start searching. You can search forward or backward at a speed between 0 and 32 times of the normal speed. While searching, the appropriate < or > indicator above the jog dial is lit according to the rotating direction. 3. To quit the shuttle mode, press any of the transport keys (the [STOP] key, etc.). If the cueing position comes to the ABS 0 or REC END point, the recorder automatically quits the shuttle mode and stops. 4-17
Page 1 and 2: KEYBOARD MOUSE SOURCE PLAY LOCATE A
Page 3 and 4: Table of Contents Chapter-1 Before
Page 5 and 6: Chapter-9 Audio file management Cre
Page 7 and 8: Chapter-1 Before using the DV40 Bef
Page 9 and 10: Setting the internal clock The inte
Page 11 and 12: Formatting a DVD-RAM disk To make a
Page 13 and 14: About audio files on a formatted di
Page 15 and 16: Chapter-2 Names and Functions This
Page 17 and 18: Front panel part 1 3 4 5 6 7 DVD MA
Page 19 and 20: c. [PLAY] key Normally, pressing th
Page 21 and 22: DISP TIME 15. [DISP TIME] key Cycle
Page 23 and 24: CUE POINT IN DST OUT PREVIEW TR3 TR
Page 25 and 26: NEW FILE INPUT MON 40. [AUDIO RDY -
Page 27 and 28: 50. [TC GEN MODE] switch Selects th
Page 29 and 30: 4. ETHERNET port ETHERNET 10/100 LI
Page 31 and 32: Chapter 3 Reformatting/optimizing a
Page 33 and 34: Tips: How to edit a volume name Whi
Page 35 and 36: Optimizing a disk By optimizing a u
Page 37 and 38: Chapter 4 Audio recording/playback
Page 39 and 40: Recording an analog source in the N
Page 41 and 42: Recording 1. Press the [RECORD] key
Page 43 and 44: You can create an audio file before
Page 45 and 46: Selecting a desired file on a disk
Page 47 and 48: Creating a "Normal mode" audio file
Page 49 and 50: KEYBOARD MOUSE SOURCE PLAY LOCATE A
Page 51: MUTE recording You can make mute re
Page 55 and 56: Chapter 5 Timecode recording This c
Page 57 and 58: ABS H M S F PGM Recording timecode
Page 59 and 60: TC Setup mode details The TC Setup
Page 61 and 62: • Selecting output timecode When
Page 63 and 64: • Catch offset you can capture th
Page 65 and 66: Chapter 6 Storing time data This ch
Page 67 and 68: Storing a time to an edit point mem
Page 69 and 70: Storing a time to a locate point me
Page 71 and 72: • Storing a time to a locate poin
Page 73 and 74: Clearing a CUE or MEMORY point memo
Page 75 and 76: Chapter 7 Locate functions This cha
Page 77 and 78: • Location to the last playback s
Page 79 and 80: • Location to a MEMORY point By s
Page 81 and 82: Chapter 8 Preview function This cha
Page 83 and 84: • Preview at a locate point You c
Page 85 and 86: Chapter 9 Audio file management Thi
Page 87 and 88: • Creating a new file on a disk j
Page 89 and 90: Editing an audio file name You can
Page 91 and 92: Restoring a deleted audio file You
Page 93 and 94: Converting the audio file format Yo
Page 95 and 96: Combining audio files You can combi
Page 97 and 98: Chapter 10 Editing track data This
Page 99 and 100: Tips: SOURCE-PLAY You can monitor t
Page 101 and 102: Flashing Tips: You can monitor the
Page 103 and 104:
5. Press the [ENTER/YES] key. The u
Page 105 and 106:
4. Press the appropriate edit point
Page 107 and 108:
Chapter 11 Setup mode In the Setup
Page 109 and 110:
You can control the display contras
Page 111 and 112:
Panel lock on/off You can select wh
Page 113 and 114:
4. After entering a desired name, p
Page 115 and 116:
• Showing the router IP address 1
Page 117 and 118:
Showing the main software version Y
Page 119 and 120:
Chapter 12 Utility mode This chapte
Page 121 and 122:
Selecting Rec Protect On or Off You
Page 123 and 124:
Chapter 13 Importing an audio file
Page 125 and 126:
4. Select the desired directory ("b
Page 127 and 128:
9. Click on in the Spot Dialog wind
Page 129 and 130:
Chapter 14 Specifications 14-1
Page 131 and 132:
Pin 5:
Page 133 and 134:
Declaration of EC Directive This eq
show all

audio file in the INSERT mode - Fostex

Create successful ePaper yourself

Delete template?

Save as template?