audio file in the INSERT mode - Fostex

LIST PLAY
EDIT
6. [LIST PLAY] ([EDIT]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
When a play list is recorded in the BMF file, pressing this key starts playback according
to the play list.
(Note that this function is not available with an SDII file.)
When SHIFTed:
Pressing this key enables editing of the recorded play list.
See "Executing a play list/Editing a play list" on page XX for details.
OPEN/CLOSE
7. [OPEN/CLOSE] key
Opens or closes the disk tray.
8. Transport keys
RECORD
STOP
PLAY
REWIND
F FWD
SOURCE PLAY
LOCATE ABS 0
LOCATE REC END
a b c d e
a. [RECORD] key
Normally, pressing this key starts recording when one of the AUDIO RDY indicators
([NEW FILE] or [INSERT]) is lit.
• In the NEW FILE mode:
Starts recording to a new file which is automatically created. If the "TC RDY" indicator
is lit, timecode is also recorded.
• In the INSERT mode:
Starts recording from the current position of the current file. If the "TC RDY" indicator
is lit, timecode is also recorded.
See "Chapter 4: Audio recording/playback" and "Chapter 5: Timecode recording" for details.
If you press the [RECORD] key when the "REC PROTECT" setting in the Utility mode is set to
"On", "Protected!" is shown and you cannot start recording.
b. [STOP] key
Normally, pressing this key stops the recorder.
In the Setup, Utility and all sort of editing mode, pressing this key exits the current
mode.
Also, pressing the [PLAY], [F FWD] key while holding down this key
executes the following.
• [STOP] + [PLAY]
Plays back sound data on the clipboard and stops the recorder.
• [STOP] + [F FWD]
Locates to REC END and stops the recorder.
2-4