audio file in the INSERT mode - Fostex

Skipped item selection for the skip mode
You can select the item to be skipped in the skip
mode.
This setting is dependent on files and is maintained
after you turn off the power.
You can save or load the setting.
Self diagnoses on/off
You can create and store self diagnoses files which
record errors detected during recording.
This setting is dependent on files and is maintained
after you turn off the power.
You can save or load the setting.
SETUP
Flashing
You can see the associated self diagnoses file by exporting
an audio file to your computer.
Flashing
Flashing
SETUP
SETUP
Flashing
“File”
Skips through audio files currently created. This is the
default.
SETUP
“CUE”
Skips through the CUE points stored in ABS time order.
“MEM”
Skips through the MEMORY points stored in ABS time
order.
“Off”
Self diagnoses files are not created.
“On”
Self diagnoses files are created. This is the default.
Auto EE mode on/off
You can set the auto EE mode to "On" or "Off".
When set it to "On", you can always monitor the
input signal except during playback or cueing.
This setting is dependent on files and is maintained
after you turn off the power.
You can save or load the setting.
SETUP
Flashing
By exporting a self diagnoses file created on a disk to
your computer, you can see the file contents as shown
in the example below.
Diagnoses list file
S18h 48m 49s 02 nov2001.sd2
2001-11-03 16:53:38
ABS time 00: 00: 04 Rec time-out error!
ABS time 00: 00: 09 Rec time-out error!
ABS time 00: 00: 15 Rec time-out error!
ABS time 00: 00: 21 Rec time-out error!
SETUP
Flashing
Diagnoses list file
S18h 48m 49s 02 nov2001.sd2
2001-11-03 17:51:22
ABS time 00: 00: 12 Rec time-out error!
ABS time 00: 00: 23 Rec time-out error!
ABS time 00: 00: 37 Rec time-out error!
ABS time 00: 00: 45 Rec time-out error!
“Off”
“On”
You can monitor the input signal by using the INPUT
MON key. This is the default.
You can always monitor the input signal except during
playback or cueing.
11-4