MP2600iec Hardware Manual
MP2600iec Hardware Manual
MP2600iec Hardware Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.1 Switch Settings<br />
5 DIP Switches<br />
5.1 Switch Settings<br />
STOP<br />
SUP<br />
INT<br />
CNFG<br />
EINIT<br />
DHCP<br />
NO<br />
S11<br />
Switch Name Setting Operating Mode<br />
Setting for<br />
Normal<br />
Operation<br />
Details<br />
1 STOP<br />
2 SUP<br />
3 INIT<br />
4 CNFG<br />
5 E-INIT<br />
6 DHCP<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
User program execution<br />
inhibited OFF Inhibits user program execution<br />
Normal operation<br />
Firmware programming<br />
mode<br />
Normal operation<br />
SRAM/clock initialization<br />
and configuration bypass<br />
mode<br />
Normal operation<br />
Normal operation<br />
Do not set (reserved for<br />
future use)<br />
Force Ethernet address<br />
setting for Port A to<br />
192.168.1.1 and Port B<br />
to 192.168.2.1<br />
Normal Operation<br />
DHCP-configured IP<br />
settings<br />
<strong>Manual</strong>ly-configured IP<br />
settings<br />
OFF<br />
OFF<br />
ON<br />
OFF<br />
OFF<br />
Enables controller firmware programming.<br />
(See Section 11)<br />
Set to ON to bypass the stored configuration<br />
(e.g. in case of a configuration problem that<br />
prevents controller startup) or to initialize the<br />
SRAM contents and clock settings after<br />
backup power has been lost (See Section<br />
7.1).<br />
Always set to ON<br />
Enables use of the default Ethernet<br />
addresses<br />
Enables use of DHCP for IP setting<br />
configuration<br />
21