Klein K10CP (PDF) - SpectraCal

Low Light Handler
What is the benefit of using this?
Meter Positioning
Flat Panels
The K-10A ships with a read head boot which can be used to nudge the K-10A right up
against a display. The boot is made of soft rubber so that you need not worry about
damaging the surface of the display. Because it removes all ambient light, the read head
boot makes the K-10A ideal for measuring reflective displays such as plasmas.
Rear Projectors
Front Projectors
Klein K-10
7 degree field of view
Can handle an amazing amount of light (100k nits)
Long focus lens included, can be switched in the field for $20, if needed.
Klein K-10 CP
Cinema Pro same as regular unit, but with pointer switch removed. Also has short focus lens.
Features
Provides quick, error-free measurements. Takes 256 sample measurements every second, even
at the lowest light levels.
Highly Accurate and Stable. Large 5mm x 5mm photodiodes, plus calibrated temperature
compensation, achieves the highest degree of accuracy and stability of any colorimeter.
Low Light Level Measurement Sensitivity of 0.00006 fL. Accurate measurement at display black
levels insure accurate analysis and contrast ratio measurements.
Luminance Measurements to 100,000 cd/m2. The K-10A provides accurate measurement of
even the extreme luminance levels produced by outdoor LED video boards and signs.
Integrated LED Calibration Table. The K-10A includes a factory calibration table for new LED light
based display measurement.
Red LED aiming aid accurately defines the area of light collected and applied to sensors.
Fully integrated and supported with CalMAN Display Calibration Software.
Soft rubber read head boot safely positions the lens to flat panel screens and blocks ambient
light without damaging the display surface.
Large Photodiodes. Diodes that are 5mm x 5mm each, along with thermally stable components,
are combined to report the highest degree of accuracy.
Exceptionally Accurate Filters. Not only is the f1' of Y critical, but also the accuracy of X and Z.
Light Mixing Chamber. This ensures all the diodes see the same light and virtually eliminates any
x,y variations by turning the probe clockwise or counter clockwise.
Quick Measurements. The head takes 256 measurements per second, even at low light. For
readability, 8 measurements per second is displayed.
3528 Bagley Ave. N. Seattle, WA 98103 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com