Cognos ReportNetTM Installation and Configuration Guide
Cognos ReportNetTM Installation and Configuration Guide Cognos ReportNetTM Installation and Configuration Guide
Chapter 4: Configuring ReportNet In a distributed environment, the sequence in which you configure computers is important. You must configure and then start the services on the Content Manager computer before you configure other ReportNet computers. The server specified in the External Dispatcher URI on the gateway computer must be the last server that you start. Use the following checklist to guide you through the required configuration tasks: ❑ Configure your Web server. ❑ Configure the Content Manager computer. ❑ Configure the report server computers. ❑ Configure the gateway computers. ❑ Configure your Web browser. ❑ Test the installation and configuration. After you complete these configuration tasks, you can change the default behavior of ReportNet (p. 40) to better suit your reporting environment. Configuring the Content Manager Computer In a distributed installation, the computer where you installed Content Manager must be configured, running and accessible before you configure other computers in your ReportNet environment. This ensures that the certificate authority service, which is installed with Content Manager, is available to issue certificates to other ReportNet computers. Before you configure Content Manager, ensure that you created the database for the content store on an available computer in your network. Use the following checklist to guide you through the required configuration tasks for the Content Manager computer: ❑ Set the Database Connection Properties for the Content Store (p. 34). ❑ Configure a Mail Server Account (p. 35). ❑ Start the ReportNet service. Other configuration tasks are optional and may be performed later. After you complete the required configuration tasks, the certificate authority service is available to issue certificates to other ReportNet computers. You can now perform the required configuration tasks on other computers, such as the report server and gateway computers. Otherwise you can continue to configure the Content Manager computer by changing the default property settings (p. 40) so that they better suit your environment. For example, you can configure ReportNet to use an authentication provider (p. 41), enable and disable services (p. 53) on the Content Manager computer, or change global settings (p. 54). Configuring Report Server Computers You can install the report server component on one or more computers, depending on your environment. Ensure that the Content Manager computer is configured and available before you configure report server computers. If Content Manager and the report server are installed on separate computers, on the report server computer, you must ❑ Configure a Mail Server Account (p. 35). ❑ Configure Environment properties. ❑ Start the ReportNet service (if not already running). Other configuration tasks are optional and may be performed later. After you complete these required configuration tasks, the report server computer can work in your environment. 38 Cognos ReportNet TM
Chapter 4: Configuring ReportNet Configure Environment Properties for the Report Server Computer If you install the report server component on a different computer than Content Manager, you must configure the report server computer so that it knows the location of Content Manager. The distributed components can then communicate with each other. Steps 1. Start Cognos Configuration. 2. In the Explorer window, click Environment. 3. In the Properties window, specify the appropriate value for the Gateway URI, by changing the localhost portion to the name of the ReportNet gateway computer. 4. In the Properties window, specify the appropriate value for the Content Manager URI, by changing the localhost portion to the name of the Content Manager computer. 5. In the Explorer window, under Cryptography, click Cognos, the default cryptographic provider. 6. Under the Certificate Authority settings property group, set the Password property to correspond to the one configured on the Content Manager computer. 7. Ensure that all other cryptographic settings correspond to the ones you set on the Content Manager computer. 8. From the File menu, click Save. 9. From the Actions menu, click Start. After you completed the required configuration tasks for each report server computer in your environment, you can now perform the required configuration tasks on other computers, such as the gateway computers. Otherwise you can continue to configure the report server computers by changing the default property settings so that they better suit your environment. For example, you can enable and disable services (p. 53), configure where to send log messages (p. 49) or configure the amount of resources the ReportNet service uses (p. 54). Configuring Gateway Computers You can install the ReportNet gateway on one or more Web server computers. The gateway computer must know the location of a dispatcher. The dispatcher can be located on the Content Manager or report server computer. You must configure the Environment properties. Other configuration tasks are optional and may be performed later. Ensure that the Content Manager computer is configured and available before you configure gateway computers. After you do the required configuration tasks, the gateway computer can work in your environment. Configure Environment Properties for the Gateway Computer If you install the gateway component on a different computer than Content Manager or report servers, you must configure the gateway computer so that it knows the location of a dispatcher. The distributed components can communicate with each other. Steps 1. Start Cognos Configuration. 2. In the Explorer window, click Environment. 3. In the Properties window, specify the appropriate value for the External Dispatcher URI, by changing the localhost portion to the name of the Content Manager or report server computer. 4. In the Explorer window, under Cryptography, click Cognos, the default cryptographic provider. Installation and Configuration Guide 39
- Page 1 and 2: COGNOS (R) ENTERPRISE BUSINESS INTE
- Page 3 and 4: Table of Contents Introduction 7 Ad
- Page 5 and 6: Chapter 10: Uninstalling Cognos Rep
- Page 7 and 8: Introduction This document is avail
- Page 9 and 10: Additional Materials In this guide,
- Page 11 and 12: Chapter 1: ReportNet Before impleme
- Page 13 and 14: Chapter 1: ReportNet Installing Rep
- Page 15 and 16: Chapter 1: ReportNet Framework Mana
- Page 17 and 18: Chapter 2: Installing ReportNet on
- Page 19 and 20: Chapter 2: Installing ReportNet on
- Page 21 and 22: Chapter 2: Installing ReportNet on
- Page 23 and 24: Chapter 2: Installing ReportNet on
- Page 25 and 26: Chapter 3: Installing ReportNet on
- Page 27 and 28: Chapter 3: Installing ReportNet on
- Page 29 and 30: Chapter 3: Installing ReportNet on
- Page 31 and 32: Chapter 3: Installing ReportNet on
- Page 33 and 34: Chapter 4: Configuring ReportNet Af
- Page 35 and 36: Chapter 4: Configuring ReportNet St
- Page 37: Chapter 4: Configuring ReportNet 3.
- Page 41 and 42: Chapter 4: Configuring ReportNet Wh
- Page 43 and 44: Chapter 4: Configuring ReportNet Th
- Page 45 and 46: Chapter 4: Configuring ReportNet St
- Page 47 and 48: Chapter 4: Configuring ReportNet 3.
- Page 49 and 50: Chapter 4: Configuring ReportNet 4.
- Page 51 and 52: Chapter 4: Configuring ReportNet St
- Page 53 and 54: Chapter 4: Configuring ReportNet 6.
- Page 55 and 56: Chapter 4: Configuring ReportNet Ad
- Page 57 and 58: Chapter 4: Configuring ReportNet Ex
- Page 59 and 60: Chapter 4: Configuring ReportNet Sp
- Page 61 and 62: Chapter 4: Configuring ReportNet 3.
- Page 63 and 64: Chapter 5: Installing Framework Man
- Page 65 and 66: Chapter 5: Installing Framework Man
- Page 67 and 68: Chapter 6: Configuring Framework Ma
- Page 69 and 70: Chapter 6: Configuring Framework Ma
- Page 71 and 72: Chapter 6: Configuring Framework Ma
- Page 73 and 74: Chapter 6: Configuring Framework Ma
- Page 75 and 76: Chapter 6: Configuring Framework Ma
- Page 77 and 78: Chapter 7: Advanced Configuration O
- Page 79 and 80: Chapter 7: Advanced Configuration O
- Page 81 and 82: Chapter 7: Advanced Configuration O
- Page 83 and 84: Chapter 7: Advanced Configuration O
- Page 85 and 86: Chapter 7: Advanced Configuration O
- Page 87 and 88: Chapter 7: Advanced Configuration O
Chapter 4: Configuring ReportNet<br />
Configure Environment Properties for the Report Server Computer<br />
If you install the report server component on a different computer than Content Manager, you<br />
must configure the report server computer so that it knows the location of Content Manager. The<br />
distributed components can then communicate with each other.<br />
Steps<br />
1. Start <strong>Cognos</strong> <strong>Configuration</strong>.<br />
2. In the Explorer window, click Environment.<br />
3. In the Properties window, specify the appropriate value for the Gateway URI, by changing<br />
the localhost portion to the name of the ReportNet gateway computer.<br />
4. In the Properties window, specify the appropriate value for the Content Manager URI, by<br />
changing the localhost portion to the name of the Content Manager computer.<br />
5. In the Explorer window, under Cryptography, click <strong>Cognos</strong>, the default cryptographic<br />
provider.<br />
6. Under the Certificate Authority settings property group, set the Password property to<br />
correspond to the one configured on the Content Manager computer.<br />
7. Ensure that all other cryptographic settings correspond to the ones you set on the Content<br />
Manager computer.<br />
8. From the File menu, click Save.<br />
9. From the Actions menu, click Start.<br />
After you completed the required configuration tasks for each report server computer in your<br />
environment, you can now perform the required configuration tasks on other computers, such as<br />
the gateway computers. Otherwise you can continue to configure the report server computers<br />
by changing the default property settings so that they better suit your environment. For example,<br />
you can enable <strong>and</strong> disable services (p. 53), configure where to send log messages (p. 49) or<br />
configure the amount of resources the ReportNet service uses (p. 54).<br />
Configuring Gateway Computers<br />
You can install the ReportNet gateway on one or more Web server computers.<br />
The gateway computer must know the location of a dispatcher. The dispatcher can be located<br />
on the Content Manager or report server computer. You must configure the Environment<br />
properties.<br />
Other configuration tasks are optional <strong>and</strong> may be performed later.<br />
Ensure that the Content Manager computer is configured <strong>and</strong> available before you configure<br />
gateway computers.<br />
After you do the required configuration tasks, the gateway computer can work in your<br />
environment.<br />
Configure Environment Properties for the Gateway Computer<br />
If you install the gateway component on a different computer than Content Manager or report<br />
servers, you must configure the gateway computer so that it knows the location of a dispatcher.<br />
The distributed components can communicate with each other.<br />
Steps<br />
1. Start <strong>Cognos</strong> <strong>Configuration</strong>.<br />
2. In the Explorer window, click Environment.<br />
3. In the Properties window, specify the appropriate value for the External Dispatcher URI,<br />
by changing the localhost portion to the name of the Content Manager or report server<br />
computer.<br />
4. In the Explorer window, under Cryptography, click <strong>Cognos</strong>, the default cryptographic<br />
provider.<br />
<strong>Installation</strong> <strong>and</strong> <strong>Configuration</strong> <strong>Guide</strong> 39