Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The electromagnetic SPS controls<br />
by Siemens are safely built<br />
inside a special casing located<br />
on the opposite side than operator<br />
station. Electronic operation<br />
hours counters also available on<br />
each machine.<br />
The machine has got automatic<br />
and manual operation mode.<br />
Switching from one mode to the<br />
other is easily done by means of<br />
control buttons located on the<br />
saw-carriage in hand-reach position.<br />
A red stop button assures<br />
immediate return of the splitter<br />
ram in case of an eventual emergency<br />
event.<br />
The wedge lift and splitter<br />
push-block are hydraulically<br />
operated by means of a hand<br />
lever conveniently located in a<br />
very ergonomic position.<br />
coMBination saw & splitteR pRocessoR<br />
Figure:<br />
SSA 310 EZ/4 “Evolution”<br />
Step-less wedge lift is performed<br />
up and down by means of a<br />
special hydraulic control.<br />
SSA 310 Z/4 and SSA 310 EZ/4<br />
are equipped with a standard<br />
telescopic belt conveyor included<br />
in price. The conveyor is made<br />
up of 2 sliding sections and is<br />
operated by means of a gear rack<br />
and crank lever. This is a very<br />
comfortable, safe and ergonomic<br />
operation.<br />
The core of the machine<br />
Special auto-cycle control<br />
valves are available so that the<br />
splitter automatically completes<br />
forward and return stroke.<br />
Moreover, auto-cycle controls<br />
include auto-switching of the<br />
machine to double splitting<br />
force and less speed, when more<br />
pressure is required for splitting<br />
hard wood logs.<br />
Three pulse generators use a<br />
magnetic field to control the system<br />
and drive the splitter ram<br />
back and forth or to stop it.<br />
A flipping plate is attached on<br />
the tilt-carriage of the saw unit<br />
to help directing the log when<br />
rolling down into the splitter<br />
after cutting. This system assures<br />
safer and exact dropping<br />
of the log into the log cradle<br />
in the splitter so that no hands<br />
reaching into the splitter work<br />
area are required.<br />
The machine is available with<br />
2, 4 or 6 ways wedges to allow<br />
sticks of firewood to be produced<br />
in a single cycle. Wood debris,<br />
saw dust, wood and bark chips<br />
are cleared through a special<br />
drop-through grate located in<br />
the splitter trough yielding a<br />
cleaner final product.<br />
Possible connections of the log<br />
push-block<br />
57
Change language