Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
chain-saw log pRocessoR<br />
ksa 450 eZ<br />
automatic firewood processor for demanding<br />
firewood producers, retailers and vendors.<br />
• hydraulic infeed belt and hydraulic wedge lift are<br />
standard!<br />
• own inbuilt hydraulics - power take off from the tractor<br />
via drive shaft is possible on request combination<br />
versions pTo and electric motor<br />
• 2 splitting rams respectively 70 and 100 mm long<br />
• Automatic switching of the second ram over to 24 t<br />
splitting force<br />
• Available on request with a 12-way wedge (extraprice)<br />
• hydraulic hold-down roller for safe cutting of the last<br />
trunk pieces<br />
• An hydraulic spacer is provided inside the splitter<br />
section to make logs roll down straight and safely<br />
settle into the trough<br />
• production specimen approved to eC safety<br />
requirements (Ce)<br />
ø 450<br />
24 t<br />
25 kW<br />
Ergonomic control board conveniently<br />
installed in a safe position<br />
for safe and user-friendly<br />
operation by one-man only.<br />
Pivoting fixation-bracket<br />
with manual hoist designed to<br />
facilitate handling and replacing<br />
of the splitting tools.<br />
Powerful electric motor<br />
-15 kW Output power = 100%<br />
power-on time equivalent to 20<br />
kW input power.<br />
Type KSA 450 EZ equipped with<br />
automatic delta/star switch<br />
for very convenient machine<br />
start-up.<br />
Oil cooler for continuous operation<br />
KSA 450 Z and 450 EZ models<br />
are equipped with a standard oil<br />
cooler for trouble-free, continuous<br />
operation even at high summer<br />
temperatures.<br />
The chainsaw unit is equipped<br />
with a 20” long sword and can be<br />
strictly operated after the chainsaw<br />
has been completely flipped down<br />
(through an hydraulic cylinder).<br />
This provides for both increased operational<br />
safety and undesirable oil<br />
waste. At the same time this system<br />
reduces waste of the guide bar.<br />
4 m long conveyor belt<br />
Swivelling 30° to the sides<br />
and adjustable up and down to<br />
facilitate clearing of the logs.<br />
The belt conveyor is powered by<br />
a gear motor and is equipped<br />
with a switching valve for speed<br />
control and adjustment.<br />
52<br />
An hydraulic control valve is provided<br />
for the infeed belt to step at<br />
required stops. So, the length of<br />
the cut-offs (logs) can be adjusted<br />
at wish between 200 and 660 mm<br />
by simply setting the valve to a<br />
different position before starting<br />
the machine. Timber jamming<br />
during sawing is fully prevented<br />
through the construction type.<br />
An hydraulic spacer is available<br />
on the machine to control rolling<br />
of the cut-offs down into the log<br />
carriage.<br />
By this system even the shortest<br />
timber pieces will smoothly roll<br />
down into the log carriage and<br />
firmly settle straight on the<br />
bottom.