Bedienungsanleitung / Operation Manual / Mode D'emploi - Alfra

More documents

Recommendations

Info

Safety instructions Attention! During drilling operations on walls and ceilings, the Metal Core Drilling Machine must be safeguarded with the included safety belt. The magnetic adhesion is not maintained in case of a failure of circuit. Attention! The cut core will be ejected automatically by the ejector pin. The ejector pin could possibly break in case of improper use. Attention! Only use undamaged power cord and extension cords and regularly check on damages. Danger of an electric shock! Attention! Power supply and voltage details at the device must correspond. Attention! When working with this device, wear the following protection equipment: Safety goggles, appropriate footwear, ear protection, hair net (for long hair), possibly also apron and safety helmet. Attention! The place of installation for the magnet foot must be clean and rustfree. Remove lacquer and filler. Attention! Do not execute any electric welding on the workpiece on which the Metal Core Drilling Machine is used. Attention! Prior to all operations mount coolant unit. Specified conditions of use This device is destined to cut material with magnetisable surface with core cutters, twist drills and to tap threads in sheltered environment for commercial use industry and craft. The device is suitable for drilling vertical, horizontal and overhead. 10
Technical Data Prod. – No.: 18625 Name : ROTABEST 60 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant supply: Voltage: Magnetic Adhesion: internal, automatically see nameplate 20000 N Boring Ø max. in Steel: - Core Cutter 60 mm - Twist Drills 32 mm Cutting Depth: Tapping: Stroke: Size of Magnet Foot: 50 mm up tp M30 190 mm 80 x 230 mm 11
Page 1 and 2: Bedienungsanleitung / Operation Man
Page 3 and 4: Sicherheitshinweise Achtung! Bei Bo
Page 5 and 6: Gerätebeschreibung A ) Antriebsmot
Page 7 and 8: Arbeiten mit Kernbohrer (Weldonscha
Page 9: EG-Konformitäts-Erklärung Wir Alf
Page 13 and 14: Switching on and off • Check conn
Page 15 and 16: Tapping With the Tapping Attachment
Page 17 and 18: Consignes de sécurité Attention!
Page 19 and 20: Description de l’appareil A ) Mot
Page 21 and 22: Pour des travaux avec des fraises (
Page 23 and 24: Déclaration de Conformité CE Nous
Page 25 and 26: Ø 40 mm Artikel - Nr. 18534 Ø 55
Page 27 and 28: Pos. Stck. Art.-Nr. 17 1 189120410
Page 29: 15 189622018 4 Blechschraube HC 4,8

Bedienungsanleitung / Operation Manual / Mode D'emploi - Alfra

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?