NEW - Cooltech Leisure

accessories for coolers and compressor refrigerators
Accessories for coolers and compressor refrigerators
Don’t stand for any restrictions in the use of your thermoelectric or compressor cooling appliance: select the corresponding
product. from the WAECO CoolPower accessory range. Power 12 / 24-volt devices via the mains or a 12-volt cooler using
the 24-volt vehicle battery: tailor-made accessories give you the power!
61
3.17
Mobile refrigeration
WAECO CoolPower M 50U
voltage monitor for 12-volt applications
Your battery voltage will always match: voltage monitor integrated in
the supply cable, for universal 12-volt applications with cigarette lighter
socket as output. Enables automatic cut-off at low battery voltage and
cut-in at normal voltage. Status indicated by LEDs.
≥ Cut-off voltage: 11.6 volts DC
≥ Cut-in voltage: 12.8 volts DC
≥ Current: up to 5 A
≥ Ready to connect with cigarette lighter plug
Ref. No.: M-50U-12
WAECO CoolPower 804 K
voltage converter 24 volts › 12 volts
For operation of thermoelectric coolers and other insulated electric
consumers that are connected to the battery for longer periods.
≥ Input voltage: 20 – 30 volts DC
≥ Output voltage: 12.5 volts DC ±10%
≥ Short-time load: 6 A / 70 watts
≥ Continuous load: 4 A / 48 watts
Ref. No.: 804K-2412
WAECO CoolPower EPS 817
mains adapter for hassle-free connection of thermoelectric 12 / 24-volt
cooling appliances to the 230-volt mains. Ideal for use at home, in
hotels, at campsites, in holiday homes etc.
≥ Input voltage: 230 volts AC / 50 Hz
≥ Output voltage: 13 volts DC
≥ Continuous load: 6 A
≥ Ready to connect with
cigarette lighter plug
Ref. No.: EPS-817U
WAECO CoolPower MPS 35
mains adapter for hassle-free connection of 12 / 24-volt cooling
appliances to the 110- to 240-volt mains. Suitable for WAECO
CoolMatic MDC and CR compressor refrigerators, and for CB built-in
coolers.
≥ Input voltage: 110 – 240 volts AC
≥ Output voltage: 25 volts DC
≥ Output power: 75 watts
≥ Battery voltage: 12 / 24 volts DC
≥ Output current: 3 A
≥ Switch mode, automatic priority
for mains operation
Ref. No.: MPS-35
WAECO CoolPower EPS 100
mains adapter for hassle-free connection of 12 / 24-volt cooling
appliances to the 230-volt mains. Suitable for WAECO CoolFreeze CDF,
CoolMatic MDC and CR compressor cooling appliances, and for
CB built-in coolers.
≥ Input voltage: 230 volts AC
≥ Output voltage: 25 volts DC
≥ Output power: 100 watts
≥ Battery voltage: 12 / 24 volts DC
≥ Output current: 4 A
≥ Switch mode, automatic priority
for mains operation
Ref. No.: EPS-100W
Contents, specifications and availability are subject to change due to the technical improvement.