Sonim Xperience One (XP1) - Sonim Technologies
Sonim Xperience One (XP1) - Sonim Technologies
Sonim Xperience One (XP1) - Sonim Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
White list calls<br />
This list contains phone numbers of persons you want to<br />
call. The options are similar to that of Black list calls. Refer<br />
“Black list calls” on page 37.<br />
Call filter settings<br />
You can enable or disable the call filter settings.<br />
1. On the Call filter screen, select Call filter settings ><br />
OK.<br />
• Enable black list: rejects all incoming calls from<br />
numbers in the black list.<br />
• Enable white list: answers incoming calls from numbers<br />
listed in the white list, and rejects incoming calls<br />
from numbers that are not available in the list.<br />
• Close filter: disallows filtering for incoming calls.<br />
Other call settings<br />
• Minute reminder: when enabled prompts you at the<br />
50th second of every minute during a conversation.<br />
2. To view whether the option is enabled or not, select<br />
Status > OK.<br />
Review call information<br />
1. Select Menu > Call list > Call meters > OK. The<br />
following options are available:<br />
• Last call: displays the duration of the last call.<br />
• Last GPRS call: displays the transmitted bytes of the<br />
last GPRS service.<br />
• Call timer: displays the duration of all the incoming or<br />
outgoing calls. Select Reset Timer > OK to restart<br />
the counter or meter.<br />
• Display cost: if enabled, displays the duration and<br />
charges of the call. Disabled mode is the default mode.<br />
• If you want to enable this function, you need to<br />
acquire a PIN2 code from your network operator.<br />
• Accum. charges: this service is only available when<br />
your SIM card contains charging information. Use this<br />
service to configure or view all charge information<br />
related to your calls.<br />
Make calls<br />
Select Menu > Settings > Call settings > Minute<br />
reminder > On.<br />
The following can be configured:<br />
• Send ID: when enabled displays your ID to the recipient<br />
when you call or send a message. However this<br />
service must be supported by your network.<br />
1. To enable this option, select Menu > Settings > Call<br />
settings > Send ID >OK.<br />
Show cost<br />
Displays total charges of<br />
all outgoing and incoming<br />
calls since the last reset.<br />
38