VOTRONIC Automatic Charger - Solarlink GmbH, preiswert und ...
VOTRONIC Automatic Charger - Solarlink GmbH, preiswert und ...
VOTRONIC Automatic Charger - Solarlink GmbH, preiswert und ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>VOTRONIC</strong> <strong>Automatic</strong> <strong>Charger</strong>s<br />
Series Pb – Installation –<br />
<strong>Automatic</strong> <strong>Charger</strong> Series Pb<br />
Designed for campers, boats, special purpose vehicles and industrial application<br />
Charging Options: 1 or 2 Supply batteries and<br />
1 or 2 Starter batteries<br />
Standard Equipment:<br />
• Charging programs No. 1, 2 and 4 (gel, AGM, acid) adjustable to the battery type (refer to page 7, Technical Data)<br />
• Outstanding charging technology (refer to page 5, Features)<br />
• The charging voltage is exempt from peaks, and it is controlled in such a way, that overcharging is excluded<br />
• All-automatic continuous operation for permanent readiness for use of the batteries<br />
• Precise temperature compensation of the battery (temperature sensor, order No. 2001, is required)<br />
• Separate auxiliary charging port “S” for support charging and conservation of charge of the vehicle’s starter battery, max. 2 A<br />
• <strong>Automatic</strong> battery regeneration in case of extended stop periods twice a week<br />
• Compensation of the voltage loss on the charging cables ensuring exact observation of the charging voltage rates<br />
• Intelligent microprocessor control observing the simultaneous supply of consumers<br />
• Separation of the batteries in case of power failure, overheating, incorrect behaviour (safety relay for each charging port)<br />
• Adjustable silent run function (reduction at night)<br />
• Power pack function allows continued operation of the consumers and preservation of data, such as in case of battery replacement<br />
Additional standard equipment for execution B:<br />
• Integrated charging current distributor with 2 main charging ports, each with max. current and output capacity<br />
• Charging current distributor can be switched to an own charging program for the starter battery<br />
• If required, the starter battery can also be charged with full charging current (short stop period of the vehicle)<br />
• Additional auxiliary charging port “S” for support charging and conservation of charge of a starter battery, max. 4 A<br />
• 4 Battery capacity rates can be adjusted (12 charging programs in total)<br />
• Inputs for sensor (sense) lines, which can be optionally used in case of charging cables in overlength and in case of external diode<br />
charging current distributors with voltage loss.<br />
• The mains/charging capacity can be reduced in case of low capacity or restricted power supply (power limit function)<br />
Additional standard equipment for execution C:<br />
• Further standard equipment identical with execution A and B (please observe the unit features)<br />
• 2 Main charging ports (A + B) with charging current distributor for 2 batteries of the same type with equal authorization<br />
Execution A<br />
Execution B