VOTRONIC Automatic Charger - Solarlink GmbH, preiswert und ...

Peripheral Units
Plus Distributor 6
Professional fuse protection of separate electric circuits at the plus side of the battery avoiding fire on cables and vehicles.
The plus feed line serving for plus distribution is to be connected to the two-pole terminal screw (2 x 6 mm²) . Thus, 6 fuseprotected
positive electric circuit connections with a large clamping range (4 mm², max. 16 A) are obtained. The electric
circuits are marked with 1-6.
The delivery includes 12 V / 24 V flat plug fuse 4x 8 A, 1 x 10 A and 1 x 15 A. Suitable for 12 V and 24 V operation.
Execution A
Minus Distributor 12
Professional junction of 12 separate electric circuits at the minus side of the battery. Particularly recommendable for ground
distribution in case of insulating (plastic) vehicle bodies. The minus feed line serving for minus distribution is to be connected
to the two-pole terminal screw (2 x 6 mm²). Thus, 12 negative electric circuit connections with a large clamping range
(4 mm², max. 16 A) are obtained. The electric circuits are marked with 1-12. Suitable for 12 V and 24 V operation.
Execution B
Plus Distributor 8
Efficient plus distributor with 6 fuse-protected outputs of different capacity values. The plus feed line of the battery is connected
to a solid terminal block with cable lug (16 mm²). The distribution is the following:
Connection 1: Terminal block with cable lug (16 mm²) and strip fuse 40 A, 50 A or 60 A, with light-emitting diode indicator,
as main protection, or for larger consumers, such as inverters up to 12 V/600 W or 24 V/1200 W, powerful chargers etc.
Connection 2: Terminal 6 mm² with flat plug fuse 30 A, such as for average consumers or charger. This branch can either
be supplied by the main circuit by means of an internal bridge, or separately from the other circuits over a second terminal
6 mm².
Connections 3 - 6: Terminals with large clamping range (4 mm² max. 16 A) and flat plug fuses 2 x 15 A and 2 x 10 A.
The cover with cable guiding unit ensures safe fixing of the cables and neat appearance. The light-emitting diode for supervision
of the strip fuse connection 1is also visible with the cover is installed. The plug-in type fuses are identified by labels.
Suitable for 12 V and 24 V operation.
Execution C
Minus Distributor 14
Efficient distributor at the minus side of the battery for 12 individual electric circuits. Particularly recommendable for ground
distribution in case of insulating (plastic) vehicle bodies. The minus feed line is connected to a solid terminal block with
cable lug (16 mm²). If required, a further terminal block serves for minus distribution (cable lug 16 mm²). The distribution
is effected on 4 terminals (6 mm², max. 32 A), as well as 8 terminals (4 mm², max. 16 A). The electric circuits are marked
with 1-12. The cover with cable guiding unit ensures safe fixing of the cables and neat appearance. Suitable for 12 V and
24 V operation.
Execution D
Fig. Without Cover
Unit Type Order No. Operating Voltage Dimensions (WxDxH) mm Execution
Plus Distributor 6 3209 12 and 24 47x75x35 A
Minus Distributor 12 3212 12 and 24 47x75x35 B
Plus Distributor 8 1 3215 12 and 24 105x71x36 C
Minus Distributor 14 2 3218 12 and 24 105x71x36 D
Delivery Scope: Manual
Delivery Scope 1 : 2 Pcs. cable lugs, 16 mm², stripe fuse 40 A, 50 A, 60 A,
flat plug fuses 1 x 30 A, 2 x 15 A and 2 x 10 A, manual
Delivery Scope 2 : 2 Pcs. cable lugs, 16 mm², manual
* Dimensions incl. mounting flanges
Fig. Without Cover
37