VOTRONIC Automatic Charger - Solarlink GmbH, preiswert und ...

More documents

Recommendations

Info

VOTRONIC Automatic Chargers Series VAC – Installation – Automatic Charger Series VAC Adapted to intervention vehicles with strongly varying mission cycles. Charging Options: 2 Main charging ports for 1 Supply battery and 1 starter battery or 2 Supply batteries or 2 starter batteries Standard Equipment: • Charging programs No. 1, 2, 3 and 5 (gel, AGM, acid, start) adjustable to the battery type (refer to page 7, Technical Data) • Outstanding charging technology (refer to page 5, Features) • The charging voltage is exempt from peaks, and it is controlled in such a way, that overcharging is excluded • Integrated charging current distributor with 2 main charging ports, each with max. current and output capacity • Charging current distributor can be switched to a 2 nd own charging program for the starter battery • If required, the starter battery can also be charged with full charging current (short stop period of the vehicle) • Additional auxiliary charging port “S” for support charging and conservation of charge of a starter battery (max. 2 A) or as signalling port +86 for motor locking while the vehicle is connected to mains • All-automatic continuous operation for permanent readiness for use of the vehicle • Precise battery temperature compensation, temperature sensor(s) is (are) included in the standard delivery • Equalization function (the characteristic line IUIU can be activated manually for compensation charging of the cells) • Intelligent microprocessor control observing the simultaneous supply of consumers • Battery regeneration in case of extended stop periods twice a week • Compensation of the voltage loss on the charging cables ensuring exact observation of the charging voltage rates • Separation of the batteries in case of power failure, overheating, incorrect behaviour (safety relay for each charging port) • Adjustable silent run function (reduction at night) • Power pack function allows continued operation of the consumers and preservation of data, such as in case of battery replacement • The electronic system is protected against humidity • Variable fitting position by additional unit label Additional standard equipment for execution B: • 4 Battery capacity rates can be adjusted (16 charging programs in total) • Inputs for sensor (sense) lines, which can be optionally used in case of charging cables in overlength and in case of external diode charging current distributors with voltage loss. • The mains/charging capacity can be reduced in case of low capacity or restricted power supply (power limit function) • Additional auxiliary charging port “S” for support charging and conservation of charge of a starter battery, max. 4 A Additional standard equipment for execution C: • Further standard equipment identical with execution A and B • 2 Main charging ports (A + B) with charging current distributor for 2 batteries of the same type with equal authorization • Signalling port +86 for motor locking while the vehicle is connected to mains • Voltage compensation for external diode charging current distributor can be adjusted (+0.63 V) Execution A Execution B 10
Charging Technology Automatic Charger Series VAC Trio 3 Main charging ports, designed for intervention vehicles, the marine field and industrial application: Charging Options: 2 Supply batteries and 1 starter battery or 1 Supply battery and 2 starter batteries or 3 Supply batteries or 3 starter batteries • Charging programs No. 1, 2, 3 and 5 (gel, AGM, acid, start) adjustable to the battery type (refer to page 7, Technical Data) • Integrated charging current distributor with 3 main charging ports, each with max. current and output capacity • For 1 or 2 starter batteries an own charging program can be adjusted at the integrated charging current distributor • Further standard equipment identical with execution A and B Unit Type Order No. Charging Capacity V/A Auxiliary Charging Port „S“ A Battery Capacity Ah No. of Charging Ports Charging Current Distributor No. of Temp. Sensors Dimensions * (WxDxH) mm Weight g Execution 12 V VAC 1210 M 3A 0412 12/10 2 25–115 2+S Yes 1 205x160x71 1250 A VAC 1215 M 3A 0414 12/15 2 38–170 2+S Yes 1 205x160x71 1280 A VAC 1220 M 3A 0416 12/20 2 50–230 2+S Yes 1 205x160x71 1300 A VAC 1225 M 3A 0418 12/25 2 60–290 2+S Yes 1 205x160x71 1350 A VAC 1230 M 3A 0422 12/30 2 75–350 2+S Yes 1 205x160x71 1450 A VAC 1240 M 3A 0424 12/40 4 75–480 2+S Yes 2 305x160x71 2400 B VAC 1250 M 3A 0426 12/50 4 88–550 2+S Yes 2 305x160x71 2450 B VAC 1260 M 3A 0431 12/60 2 120–660 2+S Yes 2 330x265x90 3900 C VAC 1250 M Trio 0428 12/50 – 88–550 3 Yes 3 305x160x71 2600 D 24 V VAC 2412 M 3A 0448 24/12 2 32–160 2+S Yes 1 205x160x71 1350 A VAC 2416 M 3A 0449 24/16 2 40–200 2+S Yes 1 205x160x71 1450 A VAC 2420 M 3A 0458 24/20 4 40–230 2+S Yes 2 305x160x71 2350 B VAC 2425 M 3A 0459 24/25 4 46–290 2+S Yes 2 305x160x71 2400 B VAC 2430 M 3A 0460 24/30 2 75–350 2+S Yes 2 330x265x90 3900 C * Dimensions incl. mounting flanges, without connections Delivery Scope: Mains cable, manual, 2 nd unit label, self-adhesive (execution A, B and D) Temperature sensor(s): 1 Pc. execution A, 2 pcs. execution B+C, 3 pcs. execution D Recommendable Accessories: Remote control, order No. 3129, remote indicator, order No. 3127 Remote distributor for chargers, order No. 2074 Execution C Execution D Option: Remote control 11
Page 1 and 2: Solarlink GmbH www.solarlink.de Cam
Page 3 and 4: Content Charging Technology 4-14 Ba
Page 5 and 6: VOTRONIC IUoU Charging Function Qui
Page 7 and 8: Charging Technology General Technic
Page 9: Charging Technology Automatic Charg
Page 13 and 14: VOTRONIC Automatic Charger Series V
Page 15 and 16: Batteries VOTRONIC Board Supply Bat
Page 17 and 18: Voltage Transformers VOTRONIC Mobil
Page 19 and 20: Solar Technology VOTRONIC Solar Com
Page 21 and 22: Solar Technology VOTRONIC Solar Cha
Page 23 and 24: Level Measurement Technology VOTRON
Page 25 and 26: Level Measurement Technology Measur
Page 27 and 28: Level Measurement Technology Measur
Page 29 and 30: Measuring Devices and Displays LCD
Page 31 and 32: Measuring Devices and Displays LCD
Page 33 and 34: Measuring Devices and Displays VOTR
Page 35 and 36: Peripheral Units Battery Conservati
Page 37 and 38: Peripheral Units Plus Distributor 6
Page 39 and 40: Peripheral Units Battery Controller
Page 41 and 42: Accessories Order No. Fig. Safety C
Page 43 and 44: Accessories Vehicle Power Supply wi

VOTRONIC Automatic Charger - Solarlink GmbH, preiswert und ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?