Product C a talogue 200 7

Installation Material
Accessories
Phaesun DC Installations
The equipment has been developed for solar
powered (battery) installations, rating
from 12 to 48V DC. 10A - 2 pole, no earth.
The socket outlet cover plates are made of
thermosetting plastic. This DC equipment
is totally polarized, e.g. the plug will fit
only one way in the outlet, assuring correct
polarity at all times. Consequently the
plug has one thick and one thin pin - making
the polarity unmistakeable. Suitable
equipment onboard for e.g. boats, yachts,
campers, cottages etc. and areas without
fully built-out electrical network that are
dependant on rechargable batteries based
on solar energy.
DC Double Surface Socket
DC Flush Type Double Surface Socket
DC Plug No Earth
DC Junction Box
Toggle Switch
Drop Light Fitting E27
Article Description Dimensions Weight Article No.
DC Double Surface Socket 12 - 48 V 95 x 62 x 25 mm 86 g 103.710
DC Flush Type Double Surface Socket 12 - 48 V 95 x 85 x 30 mm 104 g 103.711
DC Plug No Earth 12 - 48 V Ø36 x 45 mm 23 g 103.712
DC Junction Box 65 x 50 x 29 mm 40 g 103.713
Toggle Switch 63 x 63 x 36 mm 75 g 103.734
Drop Light Fitting E27 12 VDC [L] = 70 cm 95 g 107.219
CBI Circuit Breaker
Article Description Dimensions Weight Article No.
QY-1 (13) D,U2, 10 A (80 VDC / 10 A / 1 pole) 93 x 12 x 74 mm 100 g 102.892
QY-1 (13) D,U2, 16 A (80 VDC / 16 A / 1 pole) 93 x 12 x 74 mm 100 g 102.893
QY-1 (13) D,U2, 20 A (80 VDC / 20 A / 1 pole) 93 x 12 x 74 mm 100 g 102.894
QY-1 (13) D,U2, 40 A (80 VDC / 40 A / 1 pole) 93 x 12 x 74 mm 100 g 102.895
Lightboy QY-1 (13) D,U2, 50 A
QY-1 (13) D,U2, 60 A
(80 VDC / 50 A / 1 pole)
(80 VDC / 60 A / 1 pole)
93 x 12 x 74 mm
93 x 12 x 74 mm
100 g
100 g
102.896
102.897
QY-1 (13) D,U2, 32 A (80 VDC / 32 A / 1 pole) 93 x 12 x 74 mm 100 g 102.920
D-Frame Circuit Breaker 180 A (80 VDC / 180 A / 2 pole) 115 x 40 x 80 mm 300 g 107.220
Lightboy Timer
Article Description Dimensions Weight Article No.
Lightboy 12 V Timer 112 x 72 x 40 mm 300 g 103.805
Lightboy Movement Sensor
The Lightboy Movement Sensor is designed for wall or ceiling installation, has
got a range of up to 10m and a assessment angle of 120°. The Lightboy Movement
Sensor allows a stepless external adjustment of time, the value of dawn
and range. It is easy to install and the sensor head is horizontally and vertically
transversable.
Article Description Dimensions Weight Article No.
Lightboy Movement Sensor (12 VDC / 10 A / 5 to 1000 Lux) 78 x 160 x 72 mm 200 g 103.806
Phaesun Product Catalogue 2007 page 49