ATEM Switchers Manual - Holdan.eu
ATEM Switchers Manual - Holdan.eu
ATEM Switchers Manual - Holdan.eu
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
68<br />
Operating Your <strong>ATEM</strong> Switcher<br />
Wipe Transitions<br />
A wipe is a transition from one source to another and is achieved by replacing the current source by another<br />
source with a pattern that forms a shape. For example an expanding circle or diamond.<br />
Program output for a wipe transition.<br />
To perform a wipe transition on the software control panel<br />
Step 1. On the preview bus, select the video source that you want on the program output.<br />
Step 2. Select the WIPE transition style in the transition control block.<br />
Step 3. Expand the transition palette and select wipe from the transition types bar.<br />
Step 4. Use the settings in the wipe palette to customise the wipe transition.<br />
Step 5. Perform the transition as an auto transition or manual transition from the transition control<br />
block.<br />
To perform a wipe transition on the broadcast panel<br />
Step 1. On the preview bus, select the video source that you want on the program output.<br />
Step 2. Press the WIPE button to select the wipe transition type. The system control automatically<br />
navigates to the wipe patterns menu. To manually navigate to the wipe patterns menu press<br />
HOME > TRANS > WIPE PATTRN.<br />
Step 3. Use the system control menu buttons to select the wipe pattern.<br />
Wipe Transition Settings<br />
Step 4. Use the system control knobs and buttons to adjust border parameters and specify wipe<br />
direction. You can also enter a rate duration using the number pad followed by the set rate<br />
button.<br />
Step 5. Use the select bus to select the border source.<br />
Step 6. Perform the transition as an auto transition or manual transition from the transition control<br />
block.