ATEM Switchers Manual - Holdan.eu
ATEM Switchers Manual - Holdan.eu
ATEM Switchers Manual - Holdan.eu
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
50<br />
Using the <strong>ATEM</strong> 2 M/E Broadcast Panel<br />
<strong>ATEM</strong> 2 M/E Broadcast Panel<br />
Control Panel Overview<br />
The <strong>ATEM</strong> 2 M/E Broadcast Panel plugs in using an ethernet connection to the <strong>ATEM</strong> processor chassis.<br />
This keyboard has similar functions to the software panel, and the main buttons are laid out in a similar M/E<br />
style, so it's easy to move between the hardware and software interfaces.<br />
If fast and critical live switching is required, then the <strong>ATEM</strong> 2 M/E Broadcast Panel is an incredibly fast and<br />
robust control solution. There's nothing like pushing high quality buttons on a panel to ensure fast and<br />
accurate switching!<br />
When using the hardware broadcast panel and software panels together, any change on one panel will be<br />
reflected on the other, and you can use both panels at the same time.<br />
The <strong>ATEM</strong> 2 M/E Broadcast Panel can be simultaneously connected to two <strong>ATEM</strong> 1 M/E Production<br />
<strong>Switchers</strong>, or two <strong>ATEM</strong> Television Studios, or one of each. Using this single panel, you can control the two<br />
switchers individually or together by connecting the output of one switcher into the other.<br />
Using the Control Panel<br />
Mix Effects<br />
The program bus, preview bus and source names display are used together to switch sources on the<br />
program and preview outputs.<br />
Source Names Display<br />
The source names display uses labels to represent the switcher's external inputs or internal sources. Labels<br />
for the external inputs can be edited on the settings tab of the software control panel. Labels for the internal<br />
sources are fixed and don't need to be changed.<br />
Pressing the SHIFT button will change the source names display to show extra sources, called shifted<br />
sources, allowing selection of up to 40 different sources.<br />
When aux has been selected in the system control block, or in the M/E 2 destination bus, pressing the two<br />
SHIFT buttons simultaneously will change the source names display to show protected sources, available for<br />
routing to auxiliary outputs. Protected sources are program, preview, clean feed 1 and clean feed 2.<br />
<strong>ATEM</strong> Mix Effects<br />
Program Bus<br />
The program bus is used to hot switch background sources to the program output. The source currently on<br />
air is indicated by a button that is illuminated red. A blinking red button indicates that the shifted source is<br />
on air. Pressing the SHIFT button will display the shifted source.