ATEM Switchers Manual - Holdan.eu
ATEM Switchers Manual - Holdan.eu
ATEM Switchers Manual - Holdan.eu
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
44<br />
Using the <strong>ATEM</strong> 1 M/E Broadcast Panel<br />
Control Panel Overview<br />
The <strong>ATEM</strong> 1 M/E Broadcast Panel plugs in using an ethernet connection to the <strong>ATEM</strong> processor chassis.<br />
This keyboard has similar functions to the software panel, and the main buttons are laid out in a similar M/E<br />
style, so it's easy to move between the hardware and software interfaces.<br />
If fast and critical live switching is being done, then the <strong>ATEM</strong> Broadcast Panel is an incredibly fast and<br />
robust control solution. There's nothing like pushing high quality buttons on a panel to ensure fast and<br />
accurate switching!<br />
KEY<br />
1<br />
KEY<br />
2<br />
KEY<br />
3<br />
KEY<br />
4<br />
When using the hardware broadcast panel and software panels together, any change on one panel will be<br />
reflected on the other, and you can use both panels at the same time. You can also plug in more than one<br />
1 2 3<br />
broadcast panel.<br />
LUMA<br />
KEY<br />
MASK<br />
MENU<br />
CHROMA<br />
KEY<br />
PATTRN<br />
DVE<br />
<strong>ATEM</strong> 1 M/E Broadcast Panel<br />
KEY<br />
HOME<br />
4 5 6<br />
7 8 9<br />
Using the Control Panel<br />
CAM<br />
0 CLR<br />
Mix Effects<br />
The program bus, preview bus and source names display are used together to switch sources on the<br />
program and preview outputs.<br />
CUT<br />
FILL<br />
SHIFT<br />
Source Names Display<br />
ON ON ON ON<br />
The source names display uses a 4 character label to represent the switcher's external inputs or internal<br />
sources. Labels for the<br />
DSK<br />
8<br />
1external DSK 2<br />
inputs can be edited on the settings tab of the software control panel.<br />
TIE<br />
TIE<br />
Labels for the internal sources are fixed and don't need to be changed.<br />
BKGD KEY 1 KEY 2 KEY 3 KEY 4<br />
DIP<br />
MIX<br />
Pressing the SHIFT button will change the source names display to show extra sources, called shifted<br />
DVE<br />
WIPE<br />
sources, allowing selection of up to 20 different sources.<br />
When aux has been selected in the system control block, pressing the SHIFT and CUT/FILL buttons<br />
DSK 1 DSK 2<br />
CUT CUT<br />
simultaneously will change the source names display to show protected sources, available for routing to<br />
auxiliary outputs. Protected sources are program, preview, clean feed 1 and clean feed 2.<br />
<strong>ATEM</strong> Mix Effects<br />
PREV<br />
TRANS<br />
CUT<br />
DSK 1 DSK 2<br />
AUTO<br />
FTB<br />
AUTO AUTO<br />
Program Bus<br />
The program bus is used to hot switch background sources to the program output. The source currently on<br />
air is indicated by a button that is illuminated red. A blinking red button indicates that the shifted source is<br />
on air. Pressing the SHIFT button will display the shifted source.
Change language