ATEM Switchers Manual - Holdan.eu

More documents

Recommendations

Info

128 Using Blackmagic UltraScope 7. Picture Display The Picture Display is a handy confidence monitor so you can see the video that is being received by Blackmagic UltraScope. The Picture Display has three settings: COLOR, B/W (black & white) and BLUE (Blue Only). Set to COLOR or B/W depending on the needs of your facility. Black & white is popular for use in colorcorrection studios so clients don’t get confused when seeing multiple color displays, and not understanding which color display is the correct, color-calibrated display. You may wish to select B/W so there is only a single, calibrated, color display in the room. The black & white display can also provide a useful visual reference. Blue Only is used with color bar test signals for setting hue on playback decks. When adjusting hue, make sure all the blue bars are a constant brightness to attain the correct hue level. Blue Only can also be used for evaluating noise levels in cameras and telecines. Blue has the least amount of signal level, in a color video signal, and so is more susceptible to noise. The BLUE setting can provide a good way to check on noise levels in a video signal. The SDI and OPTICAL buttons are not used with ATEM Production Switchers which always use whatever video and audio is routed to Aux 1. These buttons are used with the dedicated Blackmagic UltraScope hardware which includes both SDI and optical fiber SDI connections. The Picture Display will also decode RP-188 HD and VITC SD timecode information, from the SDI video input signal, and display it on the right side of the display. If the timecode information is incorrect, check your deck to ensure it is outputting the correct timecode signal encoded as VITC or RP188. It is worth noting that some standard definition broadcast decks let you “re-stripe” the timecode track independently of the VITC, which was encoded as part of the image. This meant the VITC could not be changed without copying the video down another generation. Consequently some standard definition decks had different timecode in the VITC to the normal LTC track on the SDI video output. It is always worth checking master tapes if you think the displayed timecode is incorrect. Lastly, the video standard is displayed on the left side of the Picture Display, so you can verify the video standard, and confirm you’re monitoring the correct video feed.
129 USB 3.0 Frequently Asked Questions Can I use ATEM Production Switcher for uncompressed video capture or waveform monitoring on my Mac? No, currently Macintosh computers do not have USB 3.0 ports. However you can use a Mac Pro with any DeckLink or UltraScope card to capture or waveform monitor the SDI output of your ATEM switcher. Macintosh computers with a Thunderbolt port can use an UltraStudio 3D to capture the SDI output of your ATEM switcher. Can I use ATEM Production Switcher for uncompressed video capture or waveform monitoring on my Linux PC? No, currently there is no isochronous USB 3.0 driver support for Linux. However you can use a Linux PC with any DeckLink card to capture the SDI output of your ATEM switcher. Can I use a third party USB 3.0 PCIe card, in my Mac Pro, for uncompressed video capture or waveform monitoring? No, currently there is not a suitable USB 3.0 PCIe card that is appropriate for use with an ATEM Production Switcher. However you can use a DeckLink or UltraScope PCIe card to capture or waveform monitor the SDI output of your ATEM switcher. Can I use a third party USB 3.0 PCIe card, in my Windows PC, for uncompressed video capture or waveform monitoring? Yes. Please refer to the Blackmagic Design website: http://www.blackmagic-design.com/support/detail/supportnotes/supportnote/?sid=3956&pid=4037&os= win&isSDK=0&snid=9712 for the latest support information, including supported PCIe cards with USB 3.0. Can I use a third party USB 3.0 ExpressCard, in my Mac or Windows notebook, for uncompressed video capture or waveform monitoring? No, currently there is not a USB 3.0 ExpressCard with adequate bandwidth for use with an ATEM Production Switcher. However if you have a computer with a Thunderbolt port, you can use an UltraStudio 3D to capture the SDI output of your ATEM switcher.
Page 1 and 2:
Installation and Operation Manual A
Page 3 and 4:
Contents ATEM Production Switchers
Page 5 and 6:
Contents ATEM Production Switchers
Page 7 and 8:
7 Getting Started The program bus s
Page 9 and 10:
9 Getting Started What is an A/B Di
Page 11 and 12:
11 Getting Started Plugging in Mult
Page 13 and 14:
13 Getting Started Installing Black
Page 15 and 16:
15 Getting Started Plugging in your
Page 17 and 18:
17 Getting Started Plugging in Came
Page 19 and 20:
19 Getting Started Connecting to a
Page 21 and 22:
21 Getting Started Home Menu ATEM 1
Page 23 and 24:
23 Updating the Software How to upd
Page 25 and 26:
25 Connecting Video Outputs There a
Page 27 and 28:
27 Using ATEM Software Control Inte
Page 29 and 30:
29 Using ATEM Software Control The
Page 31 and 32:
31 Using ATEM Software Control Prog
Page 33 and 34:
33 Using ATEM Software Control Down
Page 35 and 36:
35 Using ATEM Software Control Capt
Page 37 and 38:
37 Using ATEM Software Control Audi
Page 39 and 40:
39 Using ATEM Software Control Ther
Page 41 and 42:
41 Using ATEM Software Control Sett
Page 43 and 44:
43 Using ATEM Software Control Butt
Page 45 and 46:
KEY 1 KEY 2 KEY 3 KEY 4 4 5 6 LUMA
Page 47 and 48:
1 2 3 4 5 6 47 7 8 9 Using the ATEM
Page 49 and 50:
49 Using the ATEM 1 M/E Broadcast P
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
59 Operating Your ATEM Switcher Con
Page 61 and 62:
61 Operating Your ATEM Switcher CUT
Page 63 and 64:
63 Operating Your ATEM Switcher To
Page 65 and 66:
65 Operating Your ATEM Switcher A p
Page 67 and 68:
Page 69 and 70:
69 Operating Your ATEM Switcher Wip
Page 71 and 72:
71 Operating Your ATEM Switcher DVE
Page 73 and 74:
Page 75 and 76:
75 Operating Your ATEM Switcher On
Page 77 and 78: 77 Operating Your ATEM Switcher To
Page 79 and 80: 79 Operating Your ATEM Switcher Pre
Page 81 and 82: 81 Operating Your ATEM Switcher Lum
Page 83 and 84: 83 Operating Your ATEM Switcher Per
Page 93 and 94: 93 Operating Your ATEM Switcher Bor
Page 95 and 96: 95 Operating Your ATEM Switcher Usi
Page 97 and 98: 97 Operating Your ATEM Switcher The
Page 99 and 100: 99 Operating Your ATEM Switcher If
Page 101 and 102: 101 Operating Your ATEM Switcher Cl
Page 103 and 104: 103 Using Tally Changing the Networ
Page 105 and 106: 105 Using Audio Making Your Own Aud
Page 107 and 108: 107 Using Audio Using Embedded SDI
Page 109 and 110: 109 Using Blackmagic Media Express
Page 117 and 118: 117 Using Blackmagic UltraScope Wha
Page 119 and 120: 119 Using Blackmagic UltraScope Ful
Page 121 and 122: 121 Using Blackmagic UltraScope 1.
Page 123 and 124: 123 Using Blackmagic UltraScope 3.
Page 125 and 126: 125 Using Blackmagic UltraScope Fro
Page 127: 127 Using Blackmagic UltraScope 6.
Page 131 and 132: 131 ATEM Television Studio Power Su
Page 133: 133 Warranty 12 Month Limited Warra
show all

ATEM Switchers Manual - Holdan.eu

Create successful ePaper yourself

Delete template?

Save as template?