ATEM Switchers Manual - Holdan.eu
ATEM Switchers Manual - Holdan.eu
ATEM Switchers Manual - Holdan.eu
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
104<br />
Using Audio<br />
<strong>ATEM</strong> Television Studio has an AES/EBU digital audio input<br />
Plugging in Audio and Other Audio Sources<br />
<strong>ATEM</strong> switchers can receive audio input through a dedicated audio port. All audio sources from camera<br />
microphones, pre-recorded audio and elsewhere should be routed to an audio mixer and then to the<br />
audio input on the <strong>ATEM</strong> switcher so any audio transitions are smooth and consistent.<br />
If you're using an <strong>ATEM</strong> Television Studio with a digital mixer, you can connect the AES/EBU audio output<br />
of the mixer directly to the AES/EBU IN port on the switcher. Otherwise use an inexpensive A/D converter,<br />
such as the Behringer SRC2496, to take the analog audio output of your mixer and convert it to AES/EBU<br />
audio for your switcher.<br />
If you have an <strong>ATEM</strong> Production Switcher, then you can use the included breakout cable or make your own<br />
custom breakout cable to connect your mixer's professional, balanced, analog audio output to the switcher.<br />
The <strong>ATEM</strong> 2 M/E Production Switcher also has a built-in audio mixer which allows it to use embedded<br />
HDMI and SDI audio from your cameras as well as analog audio from the audio breakout cable.<br />
<strong>ATEM</strong> Production <strong>Switchers</strong> have an analog audio in/out port<br />
which connects to a breakout cable with XLR connectors.<br />
The standard audio breakout cable included with <strong>ATEM</strong> Production <strong>Switchers</strong> connects to the AUDIO IN/OUT port.