Manual - Holdan.eu
Manual - Holdan.eu
Manual - Holdan.eu
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
11.0 COMMON OPERATIONS<br />
This section provides step by step instructions for some common operations<br />
for the C2-7000 series.<br />
11.1 Operation of the Keyer<br />
The C2-7000 series has a very powerful Luminance and Chroma keyer and<br />
can key on Window “A”, Window “B” and Window “Z” independently.<br />
The listing that follows breaks the Keyer operation down to a series of steps<br />
that are defined by Operational Mode.<br />
Switcher Mode Method (Preview > Take)<br />
Change mode:<br />
Change Mode to Switcher<br />
Setup Key Source:<br />
Enter Adjust Windows menu<br />
Select Source for the window<br />
Exit Adjust Windows menu<br />
Enter Adjust Keyers menu<br />
Turn Keyer On.<br />
Increase Y Key Max until target color disappears.<br />
Increase Y Key Min until reappears, then decrease until it disappears<br />
again.<br />
If the edges appear rough, increase the Y Key softness.<br />
The Key Min/Max may need to be readjusted after making the softness<br />
adjustment.<br />
Y Key Invert will cause the portion that is currently keyed out to<br />
become solid and the rest transparent.<br />
Increase U Key Min until reappears, then decrease until it disappears<br />
again.<br />
Decrease U Key Min until reappears, then increase until it disappears<br />
again.<br />
If the edges appear rough, increase the U Key softness.<br />
The Key Min/Max may need to be readjusted after making the softness<br />
adjustment.<br />
Increase V Key Min until reappears, then decrease until it disappears<br />
again.<br />
Decrease V Key Min until reappears, then increase until it disappears<br />
again.<br />
If the edges appear rough, increase the V Key softness.