Manual - Holdan.eu

Clear macro
F 04 02 42 00 F1 000001 3A CR F 44 02 42 00 F1 000001 7A CR
Write the function for first item in macro 3 = Zoom
F 04 02 42 00 F3 000086 C1 CR F 44 02 42 00 F3 000011 01 CR
Write data for the first item = 100
F 04 02 42 00 F2 000064 9E CR F 44 02 42 00 F2 000011 DE CR
Write the function for the second = shrink
F 04 02 42 00 F3 000087 C2 CR F 44 02 42 00 F2 000011 02 CR
Write the data for the second item = 100
F 04 02 42 00 F2 000064 9E CR F 44 02 42 00 F3 000011 DE CR
10.5.3 Run and Restore macros
Macros once programmed can be run by sending one of the following
commands. By running macro 5 the unit can be restored to its previously
saved state, when used in conjunction with the other macros this allows a
default setup or baseline for the unit to be created.
Packet sent
Packet returned
SOP CMD CHA WIN OUT FUN PAY CS EOP SOP CMD CHA WIN OUT FUN PAY CS EOP
Restore
F 04 05 42 00 F1 000000 3C CR F 44 05 42 00 F1 000000 7C CR
Run macro 1
F 04 00 42 00 F1 000000 37 CR F 44 00 42 00 F1 000000 77 CR
Run macro 2
F 04 01 42 00 F1 000000 38 CR F 44 01 42 00 F1 000000 78 CR
Run macro 3
F 04 02 42 00 F1 000000 39 CR F 44 02 42 00 F1 000000 79 CR
Run macro 7
F 04 07 42 00 F1 000000 39 3E F 44 02 42 00 F1 000000 7E CR