Manual - Holdan.eu
Manual - Holdan.eu
Manual - Holdan.eu
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
System<br />
Resolutions 88<br />
This screen is an informational screen showing the total number of the<br />
defined resolutions in the resolution database. Future firmware releases may<br />
increase the total number of resolutions defined in the database.<br />
System<br />
Logos / T-cards 1 / 4<br />
If your units supports Logos or Testcards then this screen will display how<br />
many are present in the memory of the units.<br />
System<br />
Power cycles 41<br />
Power Cycles refers to how many times the unit has been powered since it<br />
left the factory. This is an informational screen. No action is taken regardless<br />
of the value shown here, however some users have an equipment cleaning or<br />
specification audit procedure and this information may be useful to those<br />
users.<br />
System<br />
Firmware updates 11<br />
Indicates the total number of times the firmware has been changed over the<br />
life of the unit. It is quite possible for this to be more than 1, as a unit<br />
undergoes numerous tests during production.<br />
System<br />
Hours in Use 877<br />
This is another informational display for usage audit purposes.<br />
System<br />
Temp.C 30 33 43 45<br />
Certain units have built-in temperature sensors, and if yours has such a<br />
feature then the above menu item will appear. If the ambient temperature of<br />
the internal components becomes excessively high or low, the unit will shut<br />
down to prevent harm. This display shows the current value of the ambient<br />
temperature at four locations within the case and can be an early predictor of<br />
a shutdown before the shutdown actually occurs. In a comfortable room, at<br />
sea level, the temperatures should be approximately as shown in the image<br />
above (however, the temperatures will rise when using higher resolutions).