Manual - Holdan.eu

8.15 Items Associated with the System group
The final Sub Menu is for adjustments of System parameters. The “System” in
this case means the unit’s functions that are generally unrelated to individual
inputs, outputs or any of the various production features.
System
SW: 16, PT: 12, BT: 13
This screen is an informational screen. Should you require technical
assistance with your unit, the technical support personnel may request that
you read the contents of this screen to them during the support call.
The first section, “SW”, is the version of the software that is installed on your
unit. You can update software via the User Support web site (procedure to be
described later in this manual) and the updates are currently free of charge.
“PT” refers to Product Type and “BT” means Board Type. Both of these are
hardware designators and cannot be changed by the user however both
designators are important to support personnel.
System
SW date: 2006-7-11
This is an information page showing when the currently installed software was
released. The information is useful to the user as he or she compares the
date to the website information describing the current software release.
Normally, the user will examine the added features of each
new software release and determine if an update is worth
doing in their particular operation. The greater period of
time between the current date, and the date shown for the
currently installed software, the greater the likelihood that there are useful
changes and improvements present in the new release.
System
TAC# 27-56-12-93-28-33
The TAC number is a unique identifier for the unit and is for future use.
System
Push to store
This screen provides a quick and easy way to store all current operating
parameters. The unit will remember the set up you are currently using at the
time of data storage and also when you next apply power. To store the current
settings, press and release the control button.