Manual - Holdan.eu

More documents

Recommendations

Info

C2-7000 SERIES OPERATION MANUAL 14.8 I can no longer adjust the Output image resolution..........................................107 14.9 The picture on the video display is black and white..........................................107 14.10 The picture on the video display is green.........................................................107 14.11 The RGB input is selected but the image is rolling or pink. .............................. 108 14.12 The video signal from my DVD player does not appear to work.......................108 15.0 RETURN PROCEDURE........................................................................109 15.1 Are you sure there's a fault?............................................................................ 109 15.2 To return a unit for repair................................................................................. 109 16.0 WARRANTY POLICY ............................................................................111 17.0 CONNECTOR PINOUTS.......................................................................112 17.1 DVI-I connector................................................................................................ 112 17.2 RS232 / DB9 connector ................................................................................... 112 17.3 4 Pin mini-DIN S-video connector (YC) input................................................... 112 18.0 SPECIFICATION ...................................................................................113 18.1 Video Inputs..................................................................................................... 113 18.2 Genlock Input ..................................................................................................113 18.3 Independent Output 1......................................................................................113 18.4 Independent Output 2......................................................................................113 18.5 Input/Output Range .........................................................................................113 18.6 Input RGB Sync............................................................................................... 114 18.7 Output RGB Sync............................................................................................ 114 18.8 SDI/HD-SDI Embedded Audio & Ancillary Data (C2-7200 only).......................114 18.9 Audio Switching (Optional A2-2000) ................................................................ 114 18.10 Control Methods .............................................................................................. 114 18.11 Mechanical ...................................................................................................... 114 18.12 Environmental..................................................................................................114 19.0 CONTACT INFORMATION ...................................................................115
1.0 DISCLAIMER This product is intended for professional and/or home use. This product is not intended for use in a medical environment and does not have the required certifications for such use. Similarly, use aboard any aircraft or spacecraft while in flight or as an adjunct to any surface, airborne or marine navigation system or any offshore marine activity, including control of any watercraft, or any use similar to those specifically herein mentioned is prohibited. Use in the aforementioned circumstances would require additional testing and certification. You have not become the owner of any software - you have merely purchased the right to use the software. You may make one copy of the software for your own use. Other copies will be deemed a breach of copyright. No warranty is made either expressed or implied including but not limited to any implied warranties of merchantability or fitness for a particular purpose. In no event shall the supplier or manufacturer of this product be liable for errors found within, or be liable for any direct, indirect or consequential damages or loss in connection with the purchase or use of this hardware software or manual. The sole and exclusive liability to the supplier and manufacturer regardless of the form of action shall not exceed the replacement cost of the materials described herein. By using this equipment you have indicated that you have agreed to the terms listed above. If you do not wish to agree or the above terms are contrary to your conditions of purchase you may return the equipment, unused, to your supplier. All trademarks and copyrights are acknowledged. E&OE. 1.1 Regulatory Agency Acceptance European ‘CE’ Mark Statement Emissions: BS EN 50081-1 (Generic Immunity Standard for Residential, Commercial and Light Industrial) Immunity: BS EN 50082-1 (Generic Immunity Standard for Residential, Commercial and Light Industrial) Safety Directive: BS EN 60065:2002 (Audio/Visual Equipment Safety) 1.2 FCC Statement Class A Device: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction <strong>Manual</strong>, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Page 1 and 2: C2-7000 SERIES OPERATION MANUAL C2-
Page 3 and 4: C2-7000 SERIES OPERATION MANUAL Tab
Page 5: C2-7000 SERIES OPERATION MANUAL 12.
Page 9 and 10: 2.0 IMPORTANT SAFETY INSTRUCTIONS T
Page 11 and 12: 2.0 IMPORTANT: CONSIGNES DE SECURIT
Page 13 and 14: 2.0 INSTRUCCIONES IMPORTANTES DE SE
Page 15 and 16: 2.0 WICHTIGE SICHERHEITSVORSCHRIFTE
Page 17 and 18: 2.0 BELANGRIJKE VEILIGHEIDSINSTRUCT
Page 19 and 20: 3.0 CAPABILITY, TERMS OF REFERENCE
Page 21 and 22: the second output when a ‘Take’
Page 23 and 24: 3.5 Input Sources The C2-7000 serie
Page 25 and 26: Color Background Z (Lock Source) A
Page 27 and 28: From a practical standpoint, this m
Page 29 and 30: 5.0 FUNCTIONAL CHECK 5.1 Important
Page 31 and 32: connector formerly used by the moni
Page 33 and 34: Button Number C2-7100 default C2-72
Page 35 and 36: With these front panels, you can di
Page 37 and 38: 7.0 CHANGING THE OPERATING MODE As
Page 39 and 40: then press button number 1 to toggl
Page 41 and 42: 8.0 MENU TOPOGRAPHY AND ADJUSTMENT
Page 43 and 44: 8.2 Group Names and Descriptions Me
Page 45 and 46: This menu item is only available on
Page 47 and 48: Adjust windows Shrink H/V % [100] [
Page 49 and 50: Adjust keyers Keyer enable [Off] Th
Page 51 and 52: This menu item allows you change wh
Page 53 and 54: Adjust borders Border enable [On] A
Page 55 and 56: This menu item selects the desired
Page 57 and 58:
M. Comp Low M. Comp Med. M. Comp Hi
Page 59 and 60:
Wipe Size sets the ‘granularity
Page 61 and 62:
8.14 Items associated with the Adju
Page 63 and 64:
800 x 600 60 Hz H/V Start [ 88] x 2
Page 65 and 66:
System Autoset sense [Medium] In or
Page 67 and 68:
System Fan speed (rpm) 6000 Certain
Page 69 and 70:
10.0 RS232 / IP CONTROL SPECIFICATI
Page 71 and 72:
CHA (Channel) SOURCE or MACRO NUMBE
Page 73 and 74:
0x30 = CV1, 0x31 = CV2, 0x32 = CV3
Page 75 and 76:
Swap fore / background 144 0..1 = O
Page 77 and 78:
H/V start (H) 08B 0..1023 H/V start
Page 79 and 80:
Menu text CHA FUNC (Hex) Range of a
Page 81 and 82:
11.0 COMMON OPERATIONS This section
Page 83 and 84:
Decrease V Key Min until reappears,
Page 85 and 86:
The Key Min/Max may need to be read
Page 87 and 88:
Press and hold the macro button (us
Page 89 and 90:
S-curves for left and right project
Page 91 and 92:
For use with dual-channel scalers s
Page 93 and 94:
There is a formula for calculating
Page 95 and 96:
G R R G Too far apart - you need ar
Page 97 and 98:
when you’re trying to output blac
Page 99 and 100:
E.blnd H 640x480 800x600 1024x768 1
Page 101 and 102:
In the Ethernet section be sure to
Page 103 and 104:
13.3 Application menu’s 13.3.1 Fi
Page 105 and 106:
Figure 10 Scripting button screen U
Page 107 and 108:
13.5.2 Loading Logos Figure 13 Logo
Page 109 and 110:
the minimum information of Horizont
Page 111 and 112:
Figure 17 Resolution editor - advan
Page 113 and 114:
14.4 There is excessive flicker on
Page 115 and 116:
15.0 RETURN PROCEDURE Before return
Page 117 and 118:
16.0 WARRANTY POLICY LIMITED WARRAN
Page 119 and 120:
18.0 SPECIFICATION 18.1 Video Input
Page 121:
19.0 CONTACT INFORMATION Should you
show all

Manual - Holdan.eu

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?