Manual - Holdan.eu

8.10.3 Testcard Source Menu Items
Source : TC1
Testcard [ 0]
This item is only available for units supporting Testcards (TC) sources.
Used to select the Testcard from memory to use as a source for the Testcard
currently selected. The Windows Control Panel can be used to upload userdefined
Testcards.
8.11 Items associated with the Adjust transitions group
Please note that not all units have this sub-menu – it is only available on
some units with overlay and keying abilities.
Transitions control how your unit responds when a source is changed. Fades
between sources, as well as wipes and cuts, are possible. The amount of time
taken by a transition is controllable from instant transition (a ‘cut’) to several
minutes.
Adjust transitions
Transition
[Fade]
This first adjustment controls the type of transition desired, Cut, Fade or Wipe.
If you select Cut or ‘Fade’, the only remaining menu items will be ‘Switching
Fade Time’ and ‘Exit’. Selecting ‘Wipe’ exposes additional parameters.
Adjust transitions
Switching fade time [ .5]
This parameter controls how long a transition from one input to another takes.
The value can be 0 (a cut) or several minutes - adjustable in 1/10 th second
increments.
Adjust transitions
Wipe type
[Left -> Right]
If you selected “Wipe” instead of “Fade” for the transition type, you will be able
to specify the type of “Wipe” transition. The possibilities are: Left to Right,
Right to Left, Up/Down (Top to Bottom), Down/Up (Bottom to Top), Diagonal
and finally a Diamond effect.
Adjust transitions
Wipe size [100]