Manual - Holdan.eu

Selects the Logo you wish to adjust.
Adjust logos
Logo enable
[On]
Allows a logo to be turned off, and not displayed on the output screen.
Adjust logos
Logo number [1]
A fixed number of Logos can be stored in non-volatile memory for later recall.
Use this setting to select the Logo to be displayed and adjusted.
Adjust logos
H/V position [10] [10]
This parameter controls the position of the logo within the window.
Adjust logos
Max fade level % [100]
This parameter controls how visible the Logo is to the viewer. A setting of 0
renders the Logo invisible whereas a setting of 100 makes the Logo fully
visible. (In-between settings can give the Logo a transparent appearance.)
Adjust logos
Layer priority abABZ [1]
This adjustment selects the order of the window layers with respect to one
another. In the above menu, ‘a’ and ‘b’ are logos, ‘A’ is window A, ‘B’ is
Window B and ‘Z’ is the Lock Source. The default condition is shown, with
Logos a & b in front of Windows A & B, which are in turn in front of the Lock
source Z.
8.9 Items Associated with the Adjust borders group
The adjust borders menu allows the border function of your unit to be enabled
– with one border being available for each Window, Logo and Lock source.
Note that the layer priority of the Border is the same as the Window source
that it is ‘attached’ to.
Adjust borders
Border to adjust
[A]
Select the window / logo / lock source you wish to adjust.