Manual - Holdan.eu
Manual - Holdan.eu
Manual - Holdan.eu
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
13.3 Application menu’s<br />
13.3.1 File menu<br />
Figure 6 File menu<br />
Across the top of the application are the toolbar menu options. The first menu<br />
item is File within this menu you can Save and Load previous setups into the<br />
application, these setups contain all the settings of the unit. Following a Load<br />
the application will ask if you would like to synchronize the unit, if you do not<br />
synchronize then the unit and the application will show different values.<br />
13.3.2 Communications menu<br />
Figure 7 Communications menu<br />
The communications menu provides the Connect item which provides a<br />
means to disconnect from the unit and return to the main screen. Read from<br />
unit is very important as it allows selective or all of the settings to be read<br />
from the unit. Depending on your unit some of the following Read from unit<br />
menu items are not available.<br />
- The Read All option will read each of the setting sections from the unit<br />
and update the application. This item should be selected following<br />
connecting to a unit as it will synchronize the unit and the application.<br />
- The Read Macros will read the macros that are stored within the unit.<br />
- The Read Buttons will read the button assignments from the unit and<br />
update the buttons and the buttons tab within the application.<br />
- The Read Resolutions will read the complete resolution database that<br />
is currently stored in the unit. This step must be performed in order to<br />
select resolutions by name and to be able to edit resolutions.<br />
- The Read Parameters will read the all of the adjustments from the unit<br />
and update the applications.<br />
-<br />
The last menu available in Communications is Program into unit this allows<br />
selective or all the settings to be programmed into the unit.<br />
- The Program All menu will program each of the settings sections into<br />
the scaler.<br />
- The Program Macros menu will program only previously read or<br />
loaded macros into the unit.<br />
- The Program Buttons menu will program the button assignments into<br />
the unit