datavideo SE-900 RS-422/232 Remote Control Protocol - Holdan.eu

*******************************************************
Command code => 6Ch = SET_CONTRAST_CMD
Parameter #1 = > Set method: 30h=set by parameter #2 directly, 31h=Increase, 32h=Decrease
When (para#1=30h)
Parameter #2 = > Contrast value: -99~+99, default=0(80h)
--- Answer ---
Parameter #1 = > Set method: 30h=set by parameter #2 directly, 31h=Increase, 32h=Decrease
Parameter #2 = > Contrast value: -99~+99, default=0(80h)
*******************************************************
Command code => 6Dh = ASK_ CONTRAST_CMD
Parameter #1 = > NC
--- Answer ---
Parameter #1 = > NC
Parameter #2 = > Contrast value: -99~+99, default=0(80h)
*******************************************************
Command code => 6Eh = SET_ SATURATION _CMD
Parameter #1 = > Set method: 30h=set by parameter #2 directly, 31h=Increase, 32h=Decrease
When (para#1=30h)
Parameter #2 = > Saturation value: -99~+99, default=0(80h)
--- Answer ---
Parameter #1 = > Set method: 30h=set by parameter #2 directly, 31h=Increase, 32h=Decrease
Parameter #2 = > Saturation value: -99~+99, default=0(80h)
*******************************************************
Command code => 6Fh = ASK_ SATURATION _CMD
Parameter #1 = > NC
--- Answer ---
Parameter #1 = > NC
Parameter #2 = > Saturation value: -99~+99, default=0(80h)
*******************************************************
Command code => 78h = SET_UV_OFFSET_CMD
Parameter #1 = > RGB correction’s U offset value: -99~+99, default=0(80h)
Parameter #2 = > RGB correction’s V offset value: -99~+99, default=0(80h)
--- Answer ---
Parameter #1 = > RGB correction’s U offset value: -99~+99, default=0(80h)
Parameter #2 = > RGB correction’s V offset value: -99~+99, default=0(80h)
*******************************************************
Command code => 79h = ASK_UV_OFFSET_CMD
Parameter #1 = > NC
--- Answer ---
Parameter #1 = > RGB correction’s U offset value: -99~+99, default=0(80h)
Parameter #2 = > RGB correction’s V offset value: -99~+99, default=0(80h)
40