datavideo SE-900 RS-422/232 Remote Control Protocol - Holdan.eu

*******************************************************
Command code => 76h = CKCMD_GET_KEY_MODE
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
--- Answer ---
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
Parameter #2 = > Key mode: 30h=GREEN key, 31h=BLUE key, 32h=LUMA key
*******************************************************
Command code => 77h = CKCMD_SET_KEY_MODE
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
Parameter #2 = > Key mode: 30h=GREEN key, 31h=BLUE key, 32h=LUMA key
--- Answer ---
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
Parameter #2 = > Key mode: 30h=GREEN key, 31h=BLUE key, 32h=LUMA key
*******************************************************
Command code => 78h = CKCMD_GET_CK_BACK_COLOR
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
--- Answer ---
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
Parameter #2 = > Hue Offset: (-60~60), default=0(80h)
*******************************************************
Command code => 79h = CKCMD_SET_ CK_BACK_COLOR
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
Parameter #2 = > Hue Offset: (-60~60), default=0(80h)
--- Answer ---
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
Parameter #2 = > Hue Offset: (-60~60), default=0(80h)
*******************************************************
Command code => 7ah = CKCMD_GET_CK_PARAMETER
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
--- Answer ---
Parameter #1 = > Camera No.: 30h=current, 31h~34h=CAM1~CAM4
Parameter #2 = > Level: (0~100), default=40 [80h+28h]
Parameter #3 = > Density: (0~64), default=32 [80h+32]
Parameter #4 = > Spill: (-32~64), default=16 [80h+16]
27