datavideo SE-900 RS-422/232 Remote Control Protocol - Holdan.eu

More documents

Recommendations

Info

******************************************************* Command code => 133(85h) = EXT_CG_LUMAKEY_LEVEL_CMD Parameter #1 = > Get/Set: 30h=get, 31h=set When (para#1=31h) Parameter #2/3 = > CG LUMAKEY level MAX: (3xh, 3yh): xyh=the MAX luminance value Parameter #4/5 = > CG LUMAKEY level MIN: (3xh, 3yh): xyh=the MIN luminance value Parameter #6/7 = > CG Transparent point: (3xh, 3yh): xyh= the point’s luminance --- Answer --- Parameter #1 = > Get/Set: 30h=get, 31h=set Parameter #2/3 = > CG LUMAKEY level MAX: (3xh, 3yh): xyh=the MAX luminance value Parameter #4/5 = > CG LUMAKEY level MIN: (3xh, 3yh): xyh=the MIN luminance value Parameter #6/7 = > CG Transparent point: (3xh, 3yh): xyh= the point’s luminance ******************************************************* Command code => 134(86h) = EXT_CG_TRANSPARENCY_CMD Parameter #1 = > Get/Set: 30h=get, 31h=set When (para#1=31h) Parameter #2 = > CG Transparency: 0~100 --- Answer --- Parameter #1 = > Get/Set: 30h=get, 31h=set Parameter #2 = > CG Transparency: 0~100 ******************************************************* Command code => 135(87h) = EXT_CG_WINDOW_CMD Parameter #1 = > Get/Set: 30h=get, 31h=set Parameter #2 = > X/Y: 30h= set X, 31h= set Y When (para#2=30h) Parameter #3/4/5 => Window’s X LEFT: (3xh, 3yh, 3zh): xyzh=the X left position Parameter #6/7/8 => Window’s X RIGHT: (3xh, 3yh, 3zh): xyzh=the X right position When (para#2=31h) Parameter #3/4/5 => Window’s Y TOP: (3xh, 3yh, 3zh): xyzh=the Y top position Parameter #6/7/8 => Window’s Y BOTTOM: (3xh, 3yh, 3zh): xyzh=the Y bottom position --- Answer --- Parameter #1 = > Get/Set: 30h=get, 31h=set Parameter #2 = > X/Y: 30h= set X, 31h= set Y When (para#2=30h) Parameter #3/4/5 => Window’s X LEFT: (3xh, 3yh, 3zh): xyzh=the X left position Parameter #6/7/8 => Window’s X RIGHT: (3xh, 3yh, 3zh): xyzh=the X right position When (para#2=31h) Parameter #3/4/5 => Window’s Y TOP: (3xh, 3yh, 3zh): xyzh=the Y top position Parameter #6/7/8 => Window’s Y BOTTOM: (3xh, 3yh, 3zh): xyzh=the Y bottom position 20
Example: Set the CG mode to internal LUMAKEY mode. The control data stream: F0h,5Ah,0Bh,05h,01h,83h,31h,31h,38h,33h,FFh F0h, ID(5Ah) , Length(0Bh), 05h, 01h, Command code(83h),para#1(31h),para#2(31h) ,checksum_L(38h), checksum_M(33h), FFh Checksum=F0h+5Ah+0Bh+05h+01h+7Bh+31h+31h=38h The Answer from <strong>SE</strong><strong>900</strong> = FCh,5Ah,0Bh,05h,01h,83h,31h,31h,34h,34h,FFh 21
Page 1 and 2: datavideo SE-900 RS-422/232 Remote
Page 3 and 4: 1. Physical layer 1.1 Control I/O f
Page 5 and 6: 3. Application layer The applicatio
Page 7 and 8: 4.1.2.4 parameter-4= current effect
Page 9 and 10: 4.2 The control mode = 01h (NORMAL
Page 11 and 12: 4.2.5 T-bar command 1st 2nd 3rd 4th
Page 13 and 14: 137 = EXT_ASK_GPI_STATUS_CMD 138 =
Page 15 and 16: 4.4.2 The Extension Main Board Comm
Page 17 and 18: ***********************************
Page 19: 4.4.4 The Extension Main Board Comm
Page 23 and 24: ***********************************
Page 25 and 26: 5.0 The Control Command for Extensi
Page 27 and 28: ***********************************
Page 29 and 30: ***********************************
Page 31 and 32: ***********************************
Page 33 and 34: 5.2.2 CG Board Command ************
Page 35 and 36: 5.2.3 Analog Video In Board & DV In
Page 37 and 38: ***********************************
Page 39 and 40: 5.2.4 SDI IN Board Command ********
Page 41 and 42: ***********************************
Page 43 and 44: ***********************************
Page 45 and 46: Example#1: Set the CH5 DVI/VGA IN
Page 47 and 48: ***********************************
Page 49 and 50: 5.2.7 SDI OUT Board Command *******
Page 51 and 52: 5.2.8 PREVIEW Board Command *******
Page 53 and 54: ***********************************
Page 55 and 56: 5.2.9 Audio Delay Board Command ***
Page 57 and 58: ***********************************

datavideo SE-900 RS-422/232 Remote Control Protocol - Holdan.eu

Create successful ePaper yourself

Delete template?

Save as template?