Bidder Name : Tender Inviting Authority: CHIEF GENERAL ... - IDCO

Sl.
No.
Description of work
No.or
Qty.
Unit
Rate (in
Figures)
Rate (in Words)
AMOUNT
44.2 25x5mm G.I. flat 30.00 Mtr
44.3 Supply of materials and laying under ground/ floor/wall 50.00 Mtr
including making end termination and testing of 6 SWG G.I
wire for loop earthing of equipments switch boards and
panels as required complete as per direction of Egineer-incharge.
45.0 Fitting & Fixtures
45.0 Supply, delivery, installation and testing of following type
fluorescent tube fixtures directly on wall/ceiling of building
with all accessories such a copper ballast, glow starter,
power factor improvement condenser, flourescent tube
45.1
light, stove enameled box perpex sheet cover etc complete
assembly including supply and fixing on teak wood round
block and making connection from the suitable point outlet
as per direction of the EIC.
1x4x40W box type fitting similar to philips Cat No TMC 21.00 Nos
501/136 HPF with tube suspended/ directly fixed
45.2 2x4x40W box type TL fitting similar to philips cat no- 6.00 Nos
PMC/50/236 HPF with tubes suspended from ceiling by
providing two nos 18SWG M.S conduit down rod 19mm OD
with bulb & socket complete with all accessories and
connection.
45.3 4x18 WTL fitting similar to philips cat No-TBS 369/418 1.00 Nos
MDGN HPF with tube directly fixed on ceiling
46.0 Supply, delivery, installation and testing of following type of
incandescent bulb fitting on wall/ ceiling/ column of building
including supply of 60 Watt/ 100 Watt GLS lamps complete
fitting and making connection from the suitable point outlet
complete as required and as per direction of the Engineer-incharge.
46.1 Incandescent bulb of required wattage not exceeding 100
Watt on existing angle holder/ batten holder of point wiring.
13.00 Nos
47.0 Supply fixing & testing of 150 W HPSV fittings with lamp
similar to philips Cat no-SRX086/150-1xSON/SON-T &
bracket connection as per direction of E.I.C.
48.0 S/F of computer point consisting of 5 Amp plug 3 nos,
indicator & DPMCB as per direction of Engineer-in-charge.
3.00 Nos
4.00 Nos
49.0 Supply, delivery, installation and testing of following sweeps
of a.c ceiling fan of approved make complete with fan
blades, down rod canpies capacitor etc including making
connection from the suitable point outlet with 3 core 1.5
mm2 copper cord and cost of electronic type step up fan
regulator complete as required and as per direction of
Engineer-in-charage.
49.1 1200 mm SWEEP 14.00 Nos
50.0 Supply, delivery, installation and testing of 300mm
sweep,1400rpm exhaust fan suitable for operation at 250
Volt, 50Hz, a.c supply complete with a set of propeller
blade, tripod leg for mounting of mortor, ring frame, blades
gravity louver complete assembly including making hole of
suitable size for housing exhaust fan making connection
from point outlet, making good the damages caused
complete as required and as per direction of EIC.
50.1 300mm sweep 900 RPM Heavy Duty type. 3.00 No
51.0 Supply, Installation & testing of Ding Dong type Call Bell
suitable for operation in 230V AC supply, mounted on M.S
sheet metal board with bakelite cover including cost of
making connection from point outlet complete as required
as per direction of Engineer-in-charge.
4.00 No
No. of Corrections
No. of Interpolation
No. of Over writing
Signature of Bidder Page 14