Transit Modeling Guidance by Rosella Picado and ... - FSUTMSOnline
Transit Modeling Guidance by Rosella Picado and ... - FSUTMSOnline
Transit Modeling Guidance by Rosella Picado and ... - FSUTMSOnline
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Transit</strong> network coding<br />
Access Connectors: REWALK program<br />
Proceed with caution; unclear whether REWALK may have un-intended<br />
consequences (gains/loses in coverage unrelated to the project)<br />
Useful network coding diagnostic tool<br />
If the following condition exists,<br />
No connectors were generated<br />
No transit stop at centroid connectors, % walk < 95%<br />
No transit stop at centroid connector, % walk greater than or<br />
equal to 95% <strong>and</strong> shortest connector is less than ½ mi.<br />
No transit stop at centroid connector, % walk greater than or<br />
equal to 95% <strong>and</strong> shortest connector greater than ½ mi.<br />
<strong>Transit</strong> stop(s) at centroid connector <strong>and</strong> zone is 100% walk<br />
<strong>Transit</strong> stop(s) at centroid connector <strong>and</strong> % walk is between<br />
minimum threshold <strong>and</strong> 100%<br />
<strong>Transit</strong> stop(s) at centroid connector <strong>and</strong> % walk is less than<br />
minimum threshold<br />
Then:<br />
Reset % walk to zero<br />
Reset all % walks to zero <strong>and</strong> delete all<br />
connectors<br />
None (CBD exception)<br />
Reset all % walks to zero <strong>and</strong> delete all<br />
connectors<br />
None<br />
Adjust all connector times to ½ mile walk<br />
Reset all % walks to zero <strong>and</strong> delete all<br />
connectors