EY35, EY40 - Small Engine Discount

Order
15
-
16
17
Item
Electric
devices
Cylinder head
Tappet cover
(breather
plate)
Procedures
(1) Remove point cover.
(2) Remove contact breaker.
(3) Remove ignition coil and condenser.
(1) Remove spark plug.
(2) Remove cylinder head.
Remove Tappet cover.
Remarks
Be careful of the primary
lead connecting direction.
Remove the lighting coil
before disassembly.
Bolts, nuts, etc. used
4 x 12 screw and washer
. . . 2 pcs.
4 x 8 screw and washer
. . . 1 pce.
6 x 25 screw and washer
. . . 2 pcs.
10 mm flange nut . . .8 pcs. 1
Be Of the breather I 6 x
valve mounting position
14 flange bolt . . . 2 pcs.
and the order of assembl- I
ing packings.
(See Fig. 23.)
I
I
Intake and
exhaust valves
(1) Remove intake valve.
(2) Remove exhaust valve.
Intake and exhaust valve
springs, retainers and retainer
locks are common;
but be sure to set up them
on the original valves.
(See Fig. 24.)
Use valve spring retainers.
Fig. 23
Fig. 24
- 16-