EH12, EH17, EH25 - Small Engine Discount

(3) Prior to installing the reel in the starter case,
wind the starter rope in the reel for 2.5 turns in
the arrowhead direction as shown in Fig. 9-6.
Then let the rope out of the reel from the reel
notch. Line up the reel hook with the inner end
of the spring and install the reel in the starter
case.
Check that the inner end of spring is securely
hooked onto the hook.
Fig. 9-6
(4) Reassemble the parts in reverse order of disassembly.
Check that the ratchets are pushed by the
ratchet springs toward the center of the recoil.
Install the friction plate with its two bosses set
inside of the bent portion of rachets.
Apply small amount of lock-tight to the center
screw and torque it.
3.9 Nom
2.9 ft4b
Fig. 9-7
(5) Hold starter rope as shown in Fig. 9-8 and
turn reel 4 times in the arrowhead direction.
Firmly press the reel not to allow reverse turn
and pull starting knob to let starter rope out of
starter case.
Return knob slowly to let starter rope rewind
in reel.
I
I
Fig. 9-8