EH12, EH17, EH25 - Small Engine Discount
EH12, EH17, EH25 - Small Engine Discount
EH12, EH17, EH25 - Small Engine Discount
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9. STARTING SYSTEM<br />
9-1 RECOIL STARTER<br />
When repairing recoil starter, disassemble and reassemble in the following procedures.<br />
Tools : Socket wrench, Needle nose pliers, Screw driver<br />
[NOTE]<br />
The following explanation is applicable to the recoil starter for"D" type engines.<br />
For"B" type models, reverse the direction of rotation to achieve proper service work.<br />
9-1-1 HOW TO DISASSEMBLE (D Type)<br />
(1) Remove recoil starter from engine.<br />
(2) Pull starter knob and pull out starter rope for<br />
30- 40cm to line up notch on reel with outlet<br />
hole for starter rope.<br />
Hold reel with thumb and pull starter rope<br />
inside the starter case with screw driver.<br />
(See Fig. 9-1.)<br />
Rewind reel clockwise until the rotation stops.<br />
When rewinding the reel, control the rotation<br />
by holding starter rope using the notch on the<br />
reel and pressing the reel with thumb.<br />
Fig. 9-1<br />
(3) Remove parts in the following order.<br />
1. Center screw<br />
2. Friction plate<br />
3. Friction spring<br />
4. Ratchet<br />
5. Ratchet spring<br />
3 d<br />
Fig. 9-2<br />
- 49 -
Change language