BASYS EFX-8XX Wall Faucet Series | Installation Instruction | Sloan
BASYS EFX-8XX Wall Faucet Series | Installation Instruction | Sloan
BASYS EFX-8XX Wall Faucet Series | Installation Instruction | Sloan
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BATTERY REPLACEMENT<br />
NOTE: Replace Battery when LED1 indicator flashes red<br />
each time faucet is in use or when faucet stops<br />
functioning. LED1 is identified by the<br />
battery symbol.<br />
NOTE: Turning off water is not necessary.<br />
A<br />
Remove crown<br />
by loosening 2<br />
hex screws located<br />
on<br />
underside of<br />
spout and slide<br />
crown down and<br />
lift off.<br />
NOTE: Screw<br />
is captive<br />
within faucet<br />
body and will<br />
NOT fall out.<br />
LOCK<br />
UNLOCK<br />
REPLACING THE SOLENOID/FILTER<br />
NOTE: TURNING OFF WATER IS NOT NECESSARY, DUE TO INTEGRATED AUTOMATIC STOP VALVE.<br />
A<br />
Remove crown by<br />
loosening hex screw<br />
located on underside of<br />
spout and slide crown<br />
down and lift off.<br />
NOTE: Screw is<br />
captive within<br />
faucet body.<br />
D<br />
Insert new solenoid caddy<br />
at a 45° angle.<br />
B<br />
Rotate solenoid assembly<br />
counter-clockwise through<br />
a 45º angle.<br />
UNLOCK<br />
E<br />
Rotate solenoid caddy<br />
clockwise to align with<br />
arrow, locking the unit and<br />
opening water path.<br />
F<br />
Slide on crown and secure in 2 places.<br />
C<br />
Pull solenoid caddy from faucet.<br />
NOTE: Strainer can be removed, cleaned and<br />
replaced at this time.<br />
LOCK<br />
8