AL-2021/2041 Operation-Manual GB - Sharp
AL-2021/2041 Operation-Manual GB - Sharp
AL-2021/2041 Operation-Manual GB - Sharp
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Transfer charger<br />
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean<br />
the charger using the following procedure.<br />
1<br />
Turn the power switch off. (p.8)<br />
2<br />
3<br />
Ensure that the multi-bypass tray is open and then open the<br />
side cover while pressing the side cover open button.<br />
Take the charger cleaner out by holding the tab. Set the charger<br />
cleaner onto the right end of the transfer charger, gently slide<br />
the cleaner to the left end, and then remove it. Repeat this<br />
operation two or three times.<br />
Slide the charger cleaner from the right end to the left end along<br />
the groove of the transfer charger. If the cleaner is stopped on<br />
the way, smudges on copies may occur.<br />
4<br />
Return the charger cleaner<br />
to its original position.<br />
Close the side cover by<br />
pressing the round<br />
projections near the side<br />
cover open button.<br />
5<br />
Turn the power switch on. (p.7)<br />
8<br />
72