AL-2021/2041 Operation-Manual GB - Sharp
AL-2021/2041 Operation-Manual GB - Sharp
AL-2021/2041 Operation-Manual GB - Sharp
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Program<br />
No.<br />
25<br />
26<br />
28<br />
29<br />
32<br />
Mode<br />
Copy effective paper<br />
width setting function<br />
(Bypass tray)<br />
Copy effective paper<br />
width setting function<br />
(Paper tray)<br />
Selection of copy<br />
start state (Polygon<br />
rotation on/off)<br />
Fusing temperature<br />
setting when the<br />
bypass tray is used<br />
USB 2.0 mode<br />
switching<br />
*1 Large (LETTER/A4 width),<br />
2 Small (INVOICE/B5R width)<br />
*1 Large (LETTER/A4 width),<br />
2 Small (INVOICE/B5R width)<br />
*1 ON, 2 OFF<br />
1 Low, *2 High<br />
Parameters<br />
1 Full-Speed, *2 Hi-Speed<br />
* Factory default settings are indicated with an asterisk (*).<br />
5<br />
Press the start ( ) key. The right-hand number in the display<br />
will be steadily lit and the entered value will be stored.<br />
To change the setting or to set another mode, press the clear<br />
key. The unit will return to step 2.<br />
6<br />
Press the light ( ) key to return to the normal copy mode.<br />
DISPLAYING TOT<strong>AL</strong> NUMBER OF COPIES<br />
Use the following procedure to display the total number of copies.<br />
Press and hold down the clear key for approximately 5 seconds. The<br />
total number of copies will appear in two steps, each with three digits.<br />
Example: Total number of copies is 1,234.<br />
7<br />
67