AL-2021/2041 Operation-Manual GB - Sharp

USER PROGRAMS
The user programs allow the parameters of certain functions to be set, changed, or
cancelled as desired.
Setting the user programs
1
2
3
4
Press and hold down the light ( ) key for more than 5
seconds until all the alarm indicators ( , , ) blink and
" " appears in the display.
Use the left copy quantity ( ) key to select a user program
number (For the user program numbers, see the following table.).
The selected number will blink in the left side of the display.
Press the start ( ) key. The entered program number will be
steadily lit and the currently selected parameter number for the
program will blink on the right side of the display.
Select the desired parameter using the right copy quantity ( ) key.
The entered parameter number will blink on the right of the display.
Program
No.
Mode
1 Auto clear time
2 Preheat mode
3
4
6
10
Auto power shut- off
mode
Auto power shut- off
timer
SPF automatic
original discharge
time (AL-2041)
Resolution of AUTO
& MANUAL mode
Parameters
1 10 sec., 2 30 sec., *3 60 sec.,
4 90 sec., 5 120 sec., 6 OFF
*1 30 sec., 2 60 sec., 3 5 min.,
4 30 min., 5 60 min., 6 120 min.,
7 240 min.
*1 ON, 2 OFF
*1 5 min., 2 30 min., 3 60 min.,
4 120 min., 5 240 min.
1 5 min., *2 30 min.,
3 60 min., 4 120 min.,
5 240 min., 6 OFF
*1 300dpi, 2 600dpi
1 30%, 2 40%, *3 50%,
13 Memory for printer
4 60%, 5 70%
21 Reset factory 1 YES, *2 NO
22
24
Sort auto select
(AL-2041)
Prevention of OC
copies when the
original cover/SPF
is up function
*1 ON, 2 OFF
*1 ON, 2 OFF
7
66