XG-PH80W-N/X-N Operation-Manual GB

Compatibility Chart
Computer
• Multiple signal support
Horizontal Frequency: 15, 31-90 kHz,
Vertical Frequency: 50-85 Hz,
Pixel Clock: 12-165 MHz
Sync signal: Compatible with TTL level
• Compatible with sync on green signal
PC/MAC Mode Resolution
Horizontal
Vertical Analog Digital
Display
Frequency (kHz) Frequency (Hz) Support Support XG-PH80W-N XG-PH80X-N
31.5 60 ✔ ✔
37.9 72 ✔ ✔
VGA 640 × 480
37.5 75 ✔ ✔
43.3 85 ✔
35.2 56 ✔ ✔
Upscale
37.9 60 ✔ ✔
48.1 72 ✔ ✔
SVGA 800 × 600
Upscale
46.9 75 ✔ ✔
53.7 85 ✔
48.4 60 ✔ ✔
56.5 70 ✔ ✔
XGA 1024 × 768
TRUE
60.0 75 ✔ ✔
68.7 85 ✔
PC
1280 × 720 45.0 60 ✔ ✔
1280 × 768 47.8 60 ✔ ✔
TRUE
49.7 60 ✔ ✔
WXGA 1280 × 800
62.8 75 ✔
47.7 60 1360 × 768 ✔
1366 × 768 47.7 60 ✔
1440 × 900 55.9 60 WXGA+ ✔
Intelligent
Compression
1152 × 864 67.5 75 ✔
1280 × 960 60.0 60 ✔ ✔
Intelligent
SXGA
64.0 60 ✔ ✔ Compression
1280 × 1024
80.0 75 ✔ ✔
SXGA+ 1400 × 1050 65.3 60 ✔ ✔
WSXGA+ 1680 × 1050 65.3 60 ✔
UXGA 1600 × 1200 75.0 60 ✔
VGA 640 × 480 34.9 67 ✔
MAC 13”
Upscale
MAC 16” SVGA 832 × 624 49.7 75 ✔
Upscale
MAC 19” XGA 1024 × 768 60.2 75 ✔ TRUE
Intelligent
Intelligent
MAC 21” SXGA 1152 × 870 68.7 75 ✔
Compression Compression
Note
• Optimum image quality will be achieved by matching your computer's output resolution to the
resolution that corresponds to “TRUE” in the “Display” column shown above.
• When “Screen resolution” of the computer is different from the resolution displayed on the projected
image, follow the procedures shown below.
– Make the appropriate adjustments for “Resolution” in “SIG-ADJ”.
– Depending on the computer you are using, the output signal may not be faithful to the “Screen resolution”
adjustment. Check the settings of the computer's signal output. If the settings cannot be changed, it is
recommended that the resolution be set to the one that corresponds to “TRUE” in the “Display” column.
Appendix
71