XG-PH80W-N/X-N Operation-Manual GB

More documents

Recommendations

Info

Viewing Stereoscopic 3D Images (Continued) Information on the 3D Projection Function • To display 3D images, this projector requires: WHAT YOU WILL NEED 1) Source devices that support the field sequential format – For details on the supported signals, see the Compatibility Chart in this operation manual. 2) 3D LCD shutter glasses that support the DLP ® Link* system – Contact your nearest Sharp Authorized Projector Dealer for purchasing details. * DLP ® Link is a trademark of Texas Instruments. • The projected image may become dark when using the 3D projection function (with “DLP ® Link ” set to “On”). • When “DLP ® Link” is set to “On”, the following functions may not work fully or may not be available at all. – Keystone – Resize – Image Resizing • 3D formats except for the field sequential method, such as ones used for Blu-ray 3D or DVD prepackaged media, are not compatible with this projector. (As of February 2011) • If the power of your left and right eyes greatly differs and you primarily use one eye for viewing the images, the images will not appear in 3D. In addition, images may be difficult to view in 3D or images may not be able to be viewed in 3D depending on the individual or the content being displayed. The stereoscopic effect varies with the individual. • 3D viewing is possible within the range that the 3D LCD shutter glasses are able to receive light signals reflected by the screen. However, most 3D images are manufactured to be viewed from directly in front of the screen, so 3D viewing is recommended directly in front of the screen as much as possible. – The range for receiving signals varies depending on the 3D LCD shutter glasses. For details, see the operation manual of your 3D LCD shutter glasses. • 3D images may not be able to be played back correctly on your computer. 58
Using 3D Viewing Mode Use the following procedure to project 3D images. For operation of the 3D LCD shutter glasses and the 3D-video playback equipment, see the corresponding operation manual. P/Rbuttons (ENTER) button 3D MODE button 7 Press P or R to select “DLP® Link”, and then select “On”. 8 Select “DLP® Link Invert”, and then press (ENTER) to switch the mode and enable more natural 3D image viewing. 9 Warning! • If the projector, 3D-video playback equipment, and 3D LCD shutter glasses are not properly set, you may experience eye strain in addition to not being able to view the images in 3D. Press 3D MODE. • The 3D MODE menu will disappear. Projecting 3D images 1 2 3 4 5 6 Turn the projector on. Turn the 3D-video playback equipment on. • Set the 3D-video playback equipment so that it outputs one of the signals listed in the Compatibility Chart in this operation manual. Switch the Input mode of the projector to enable input of 3D video signals. Operate the 3D-video playback equipment and play back the 3D content. Turn the 3D LCD shutter glasses on and place them over your eyes. Press 3D MODE on the remote control to display the 3D MODE menu. Note • If the images are not displayed in 3D, repeat steps 6 to 8. • You can also use “DLP ® Link” and “DLP ® Link Invert” on the menu screen to change the 3D setting. Ending 3D projection 1 2 3 Press 3D MODE on the remote control to display the 3D MODE menu. Press P or R to select “DLP® Link”, and then select “Off”. Press 3D MODE. • The 3D MODE menu will disappear. Note • You may not be able to enjoy the full 3D effects depending on the installation or usage environment of the projector. • When you use the 3D projection function, it is recommended that “Lamp Mode” be set to “Both Lamps” and “Eco + Quiet” be switched to “Off”. Useful Features 59
Page 1 and 2:
DATA PROJECTOR MODEL XG-PH80W-N XG-
Page 3 and 4:
SPECIAL NOTE FOR USERS IN THE U.K.
Page 5 and 6:
Before using the projector, please
Page 7 and 8:
How to Read this Operation Manual
Page 9 and 10:
Adjusting the Projector Function (
Page 11 and 12: 15. Overloading Do not overload wal
Page 13 and 14: Caution regarding usage of the proj
Page 15 and 16: Accessories Supplied accessories In
Page 17 and 18: Part Names and Functions Numbers in
Page 19 and 20: Numbers in Z refer to the main page
Page 21 and 22: Easy Start This section shows the b
Page 23 and 24: Setting Up the Projector Video Setu
Page 25 and 26: Connecting the Projector to Other E
Page 27 and 28: Equipment Video equipment, Camera,
Page 29 and 30: When connecting to the LAN terminal
Page 31 and 32: 5 Insert the replacement lens with
Page 33 and 34: Image Projection Shifting the Lens
Page 35 and 36: Adjusting the Focus Press FOCUS +/-
Page 37 and 38: INPUT button (ENTER) button P/R but
Page 39 and 40: Basic Operation RESIZE Output scree
Page 41 and 42: Using the Remote Control to Operate
Page 43 and 44: Useful Features “Signal adjustmen
Page 45 and 46: Using the Menu Screen Adjustment bu
Page 47 and 48: Picture Adjustment (“Picture” M
Page 49 and 50: Menu operation n Page 41 7 Adjustin
Page 51 and 52: Video Adjustment (“Video” Menu)
Page 53 and 54: Adjusting the Projected Image (“S
Page 55 and 56: Menu operation n Page 41 9 Security
Page 57 and 58: Menu operation n Page 41 5 Setting
Page 59 and 60: Useful Features Returning to the De
Page 61: Useful Features WARNING ■ The fol
Page 65 and 66: Maintenance Cleaning the projector
Page 67 and 68: 2 Remove the filter covers. • Rem
Page 69 and 70: TEMP. (temperature warning)/ STATUS
Page 71 and 72: Removing and Installing the Lamp Un
Page 73 and 74: Replacing the Color Wheel The proje
Page 75 and 76: Compatibility Chart Computer • Mu
Page 77 and 78: Troubleshooting Problem Check Page
Page 79 and 80: Problem Check Page 3D images fl ick
Page 81 and 82: Specifications Model XG-PH80W-N XG-
Page 83: Index 4:3·············
show all

XG-PH80W-N/X-N Operation-Manual GB

Create successful ePaper yourself

Delete template?

Save as template?